Datasheet

ManualsBrandsLITE-ON ManualsLEDs & AccessoriesLED wired White Circular 3 mm 2.6 cd 25 ° 30 mA 3.6 V

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Features

* Low power consumption.

* High efficiency.

* Versatile mounting on p.c. board or panel.

* I.C. compatible/low current requirement.

* Popular T-1 diameter.

Package Dimensions

Part No. Lens Color Emitted Color

LTW-420C5 Water Clear InGaN White

NOTES:

1. All dimensions are in millimeters (inches).

2. Tolerance is

0.25mm(.010") unless otherwise noted.

3. Protruded resin under flange is 1.0mm(.04") max.

4. Lead spacing is measured where the leads emerge from the package.

5. Specifications are subject to change without notice.

Part No. : LTW-420C5 Page : 1 of 8

BNS-OD-C131/A4

Summary of content (8 pages)

PAGE 1
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Low power consumption. * High efficiency. * Versatile mounting on p.c. board or panel. * I.C. compatible/low current requirement. * Popular T-1 diameter. Package Dimensions Part No. Lens Color Emitted Color LTW-420C5 Water Clear InGaN White NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4.
PAGE 2
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at Ta=25℃ PARAMETER MAXIMUM RATING UNIT 120 mW 100 mA DC Forward Current 30 mA Reverse Voltage 5 V Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Operating Temperature Range -25℃ to + 80℃ Storage Temperature Range -30℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063") From Body] Part No.
PAGE 3
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at Ta=25℃ PARAMETER UNIT TEST CONDITION 2600 mcd IF = 20mA Note 1,2,3 Iv Spec. Table 2θ1/2 25 deg Note 4 x 0.30 y 0.30 Forward Voltage VF 3.6 Reverse Current IR Luminous Intensity Viewing Angle SYMBOL Iv MIN. 1500 TYP. MAX. IF = 20mA Note 5 Hue Spec. Table & Chromaticity Coordinates Chromaticity Diagram 4.1 V IF = 20mA 10 μA VR = 5V NOTE: 1.
PAGE 4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No.
PAGE 5
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Packing Spec 1,000 pcs per packing bag 10 packing bags per inner carton Total 10,000 pcs per inner carton 8 Inner cartons per outer carton Total 80,000 pcs per outer carton Part No.
PAGE 6
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Iv Spec. Table for Reference Iv Bin Luminous Intensity (mcd) , If = 20mA min. max. RS 1500 2500 TU 2500 4200 Luminous Intensity Measurement allowance is 15% Hue Spec. Table for Reference Hue Bin Chromaticity Coordinates x 0.370 0.370 0.330 0.330 y 0.450 0.350 0.300 0.400 x 0.330 0.330 0.306 0.306 y 0.400 0.300 0.269 0.369 x 0.306 0.306 0.285 0.285 y 0.369 0.269 0.244 0.344 x 0.285 0.285 0.250 0.250 0.344 0.
PAGE 7
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
PAGE 8
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 7. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage. ■ Use a conductive wrist band or anti-electrostatic glove when handling these LEDs. ■ All devices , equipment , and machinery must be properly grounded. ■ Work tables , storage racks , etc. should be properly grounded .