SMD LED Product Data Sheet LTW-006DCG-5 Spec No.: DS22-2010-0293 Effective Date: 11/30/2010 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Package in 12mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. * Meet green product and Pb -free(According to RoHS) Package Dimensions Anode Part No. Lens Color Source Color LTW-006DCG-5 Yellow InGaN White Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1 mm (.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at Ta=25℃ Parameter LTW-006DCG-5 Unit 120 mW 100 mA DC Forward Current 30 mA Reverse Voltage 5 V Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical Optical Characteristics Parameter Ta=25℃ Symbol Part No. LTW- Min. IV 006DCG-5 450 2θ1/2 006DCG-5 Luminous Intensity Viewing Angle At Max. Unit Test Condition 750 mcd IF = 5mA Note 1, 2, 5 deg Fig.6 110 x Chromaticity Coordinates Typ. IF = 5mA Note 3, 5 Fig.1 0.277 006DCG-5 y 0.255 Forward Voltage VF 006DCG-5 2.65 ESD-Withstand Voltage ESD 006DCG-5 200 3.25 V IF = 5mA V HBM Note : 1.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Bin Code List VF Spec. Table VF Bin Forward Voltage (V) at IF = 5mA Min. Max. V0 2.65 2.75 V1 2.75 2.85 V2 2.85 2.95 V3 2.95 3.05 V4 3.05 3.15 V5 3.15 3.25 V6 Tolerance on each Forward Voltage bin is +/-0.10 volt IV Spec. Table Luminous Intensity (mcd) at IF = 5mA IV Bin Min. Max.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Color Ranks Table Color bin limits at IF = 5mA Ranks C12 C21 C22 C31 C32 B12 B21 B22 B31 B32 CIE 1931Chromaticity coordinates x 0.265 0.27 0.27 0.265 y 0.237 0.245 0.258 0.25 x 0.27 0.275 0.275 0.27 y 0.245 0.253 0.266 0.258 x 0.275 0.28 0.28 0.275 y 0.253 0.261 0.274 0.266 x 0.28 0.285 0.285 0.28 y 0.261 0.269 0.282 0.274 x 0.285 0.29 0.29 0.285 y 0.269 0.277 0.29 0.282 x 0.265 0.27 0.27 0.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only User Guide Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If cleaning is necessary, immerse the LED in ethyl alcohol or isopropyl alcohol at normal temperature for less one minute. Recommend Printed Circuit Board Attachment Pad Infrared / vapor phase Reflow Soldering Package Dimensions of Tape Note: 1.All dimensions are in millimeters (inches). Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Package Dimensions of Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-2000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with EIA-481-1-E2 specifications. Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 6. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use of a conductive wrist band or anti-E2lectrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 7.2 Criteria for Judging the Damage Criteria for Judgment Min. Max. Item Symbol Test Conditions Forward Voltage VF IF=20mA - U.S.L.*) ╳ 1.1 Luminous Intensity IV IF=20mA U.S.L.**) ╳ 0.7 - 8. Others The appearance and specifications of the product may be modified for improvement without prior notice. 9. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2.
