Datasheet

LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
ABSOLUTE MAXIMUM RATING
( Ta = 25°C )
PARAMETER SYMBOL RATING UNIT
Forward Current IF
±150
mA
INPUT
Power Dissipation P 230 mW
Collector - Emitter Voltage VCEO 35 V
Emitter - Collector Voltage VECO 6 V
Collector Current IC 80 mA
OUTPUT
Collector Power Dissipation P
C 160 mW
Total Power Dissipation Ptot 320 mW
*1 Isolation Voltage Viso 5,000 Vrms
Operating Temperature Topr -30 ~ +100
°C
Storage Temperature Tstg -55 ~ +125
°C
*2 Soldering Temperature T
sol 260
°C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. :
LTV-814H / 824H / 844H ( M, S, S-TA1 )
Page :
8 of 12
BNS-OD-C131/A4