Photocoupler Product Data Sheet LTV-0601 Spec No.: DS70-2013-0015 Effective Date: 05/13/2014 Revision: B LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.
PHOTOCOUPLER LTV-0601 1. DESCRIPTION The LTV-0601 consists of a high efficient AlGaAs Light Emitting Diode and a high speed optical detector. This design provides excellent AC and DC isolation between the input and output sides of the Optocoupler. The output of the optical detector features an open collector Schottky clamped transistor. The enable function allows the optical detector to be strobed. A guaranteed common mode transient immunity is up to 10kV/μs at 3.3V.
PHOTOCOUPLER LTV-0601 2. PACKAGE DIMENSIONS Part No : LTV-0601 Notes : 1. Date code 2. “V” to represent VDE0884 3. 1st digit year code, 2nd and 3rd digit work week code Dimensions are all in Millimeters. 2/17 Part No.
PHOTOCOUPLER LTV-0601 3. TAPING DIMENSIONS Description Symbol Dimension in mm (inch) Tape wide W 16±0.3 (0.63) Pitch of sprocket holes P0 4±0.1 (0.15) F 7.5±0.1 (0.295) P2 2±0.1 (0.079) P1 8±0.1 (0.47) Distance of compartment Distance of compartment to compartment Quantities Per Reel Package Type LTV-0601 Quantities (pcs) 2000 3/17 Part No.
PHOTOCOUPLER LTV-0601 4. RATING AND CHARACTERISTICS 4.1 Absolute Maximum Ratings at Ta=25°C *1 Parameter Input Output Symbol Rating Unit Note Average Forward Input Current IF 20 mA 2 Reverse Input Voltage VR 5 V Power Dissipation PI 40 mW Enable Input Voltage VE Vcc+0.
PHOTOCOUPLER LTV-0601 4.2 Recommended Operating Conditions Parameter Symbol Min Max Operating Temperature TA -40 85 2.7 3.6 Supply Voltage VCC 4.5 5.5 Unit o C V Low Level Input Current IFL 0 250 μA High Level Input Current IFH 5 15 mA Low Level Enable Voltage VEL 0 0.8 V High Level Enable Voltage VEH 2 VCC V Output Pull-up Resistor RL 330 4k Ω Fan Out (at RL=1kΩ per channel) N — 5 TTL Loads 5/17 Part No.
PHOTOCOUPLER LTV-0601 4.3 ELECTRICAL OPTICAL CHARACTERISTICS Parameter Symbol Min. Typ. Max. Unit Test Condition VF — 1.38 1.70 V IF= 10mA ΔVF/ ΔT — -1.5 — mV/OC IF= 10mA BVR 5.0 — — V IR = 10μA Input Threshold Current ITH — 1.5 5 mA VE = 2V, VCC = 3.3V, VO = 0.6V IOL (sinking) = 13mA Input Capacitance CIN — 34 — pF f = 1MHz, VF = 0V High Level Supply Current ICCH — 3.8 10 uA VE= 0.5V, VCC= 3.3V, IF = 0mA Low Level Supply Current ICCL — 5.8 13 mA VE= 0.
PHOTOCOUPLER LTV-0601 Parameter Symbol Min. Typ. Max. Unit Test Condition VF — 1.38 1.70 V IF= 10mA ΔVF/ ΔT — -1.5 — mV/OC IF= 10mA BVR 5.0 — — V IR = 10μA Input Threshold Current ITH — 1.35 5 mA VCC = 5.5V, VO = 0.6V IOL > 13mA Input Capacitance CIN — 34 — pF f = 1MHz, VF = 0V High Level Supply Current ICCH — 6.1 10 uA VE = 0.5V, VCC = 5.5V, IF = 0mA Low Level Supply Current ICCL — 8.3 13 mA VE = 0.5V, VCC= 5.
PHOTOCOUPLER LTV-0601 5. SWITCHING SPECIFICATION Parameter Symbol Min. Typ. Max. Unit Propagation Delay Time to High Output Level tPLH 25 48 90 ns 3 Propagation Delay Time to Low Output Level tPHL 25 35 75 ns 4 |tPLH tPHL| — 13 — ns tPSK — — 40 Output Rise Time (10 to 90%) tr — 21 — ns — Output Fall Time (90 to 10%) tf — 6.
PHOTOCOUPLER LTV-0601 Parameter Symbol Min. 10 Typ. 15 Max. Unit — Logic High Common Mode |CMH| kV/μs Transient Immunity 10 10 15 15 — — VCC = 3.3V VCM = 1000V RL = 350Ω IF = 10.0mA TA = 25oC |CML| kV/μs Transient Immunity 15 VCC = 3.3V VCM = 1000V RL = 350Ω IF = 0mA TA = 25oC VCC = 5V VCM = 1000V RL = 350Ω IF = 0mA TA = 25oC Logic Low Common Mode 10 Test Condition — Note 7 8 VCC = 5V VCM = 1000V RL = 350Ω IF = 10.0mA TA = 25oC 9/17 Part No.
PHOTOCOUPLER LTV-0601 6. ISOLATION CHARACTERISTIC Parameter Symbol Min. Typ. Max. Unit II-O — — 1.0 μA VISO 3750 — — VRMS Input-Output Resistance RI-O — 1012 — Ω VI-O = 500V DC 9, Input-Output Capacitance CI-O — 1.
PHOTOCOUPLER LTV-0601 7. SWITCHING TIME TEST CIRCUIT 3.3V or 5V PULSE GEN. Z O = 50Ω t r = t r = 5 ns IF =7.5mA RL IF 0.1 uF Bypass IF =3.75mA INPUT( I F ) MONITOR VO I F MONITOR OUTPUT( VO) 1.5V CL =15 pF t PLH t PHL CL INCLUDES PROBE AND STRAY WIRING CAPACITANCE Figure 1: Test Circuit for tPHL and tPLH MONITOR VE PULSE GEN. Z O = 50Ω t r = t r = 5 ns 3.3V or 5V 3.0V RL IF =7.5mA 0.1 uF Bypass 1.5V INPUT( VE) MONITOR VO OUTPUT( VO) 1.
PHOTOCOUPLER LTV-0601 3.3V or 5V IF RL B A 0.1 uF Bypass VCM(PEAK) MONITOR VO VCM 0V VO 5V SW A: I F=0mA CMH VO(MIN) VO 5V VO(MAX) CML SW B: I F=7.5mA VCM + - PULSE GEN. Z O = 50Ω Figure 3: Single Channel Test Circuit for Common Mode Transient Immunity 12/17 Part No.
PHOTOCOUPLER LTV-0601 1.4 5 IOH - High Level Output Current - μA IOH - High Level Output Current - uA 8. CHARACTERISTIC CURVES 4 3 2 VCC = 3.3V VO = 3.3V VE = 2.0V IF = 250μA 1 VCC = 5.0V VO = 5.5V VE = 2.0V IF = 250μA 1.2 1 0.8 0.6 0.4 0.2 0 0 -40 -20 0 20 40 60 80 100 -40 -20 TA - Ambient Temperature - oC 0 20 40 60 80 100 TA - Ambient Temperature - oC Figure 4: Typical High Level Output Current vs. Ambient Temperature VCC = 3.3V VO = 0.6V 3.5 3 RL=350Ω RL=1KΩ 2.5 2 1.
PHOTOCOUPLER LTV-0601 IOL - Low Level Output Current - mA 70 VCC = 3.3V VE = 2.0V VOL = 0.6V 60 50 IF = 5mA 40 30 -40 -20 0 20 40 60 80 100 TA - Ambient Temperature - oC Figure 7: Typical Low Level Output Current vs. temperature Figure 8: Typical Input Diode Forward Characteristic 14/17 Part No.
PHOTOCOUPLER LTV-0601 100 70 tPLH, RL = 350Ω 60 50 40 30 tPHL, RL = 350Ω 20 10 … tPLH ― tPHL VCC = 5.0V IF = 7.5mA 90 80 tP - Propagation Delay - ns tP - Propagation Delay - ns 100 VCC = 3.3V IF = 7.5mA 90 80 RL = 4KΩ 70 60 RL = 350Ω, 4KΩ 50 40 30 RL = 350Ω, 1KΩ, 4KΩ 20 10 0 0 -40 -20 0 20 40 60 80 -40 100 -20 TA - Ambient Temperature - oC 0 20 40 60 80 100 80 100 TA - Ambient Temperature - oC Figure 9: Typical Propagation Delay vs. Ambient Temperature 50 VCC = 3.
PHOTOCOUPLER LTV-0601 9. TEMPERATURE PROFILE OF SOLDERING 9.1 IR Reflow soldering (JEDEC-STD-020C compliant) One time soldering reflow is recommended within the condition of temperature and time profile shown below. Do not solder more than three times. Profile item Conditions Preheat - Temperature Min (TSmin) 150˚C - Temperature Max (TSmax) 200˚C - Time (min to max) (ts) 90±30 sec Soldering zone - Temperature (TL) 217˚C - Time (tL) 60 ~ 100 sec Peak Temperature (TP) 260˚C 3˚C / sec max.
PHOTOCOUPLER LTV-0601 9.2 Wave soldering (JEDEC22A111 compliant) One time soldering is recommended within the condition of temperature. Temperature: 260+0/-5˚C Time: 10 sec. Preheat temperature:25 to 140˚C Preheat time: 30 to 80 sec. 9.3 Hand soldering by soldering iron Allow single lead soldering in every single process. One time soldering is recommended. Temperature: 380+0/-5˚C Time: 3 sec max. 10. Notes: Specifications of the products displayed herein are subject to change without notice.
