SMD LED Product Data Sheet LTST-S220TBKT Spec No.: DS22-2000-239 Effective Date: 12/10/2013 Revision: G LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Meet ROHS. * Side Looking Chip LED with Tin Plating * Ultra Bright InGaN Chip LED. * Package in 8mm Tape on 7" Diameter Reels. * EIA STD Package. * I.C. Compatible. * Compatible with Automatic Placement Equipment. * Compatible with Infrared Reflow Solder Process. Package Dimensions Part No. Lens Source Color LTST-S220TBKT Water Clear InGaN Blue Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.10 mm (.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings At Parameter Ta=25℃ LTST-S220TBKT Unit Power Dissipation 76 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 mA DC Forward Current 20 mA Operating Temperature Range -20°C to + 80°C Storage Temperature Range -30°C to + 100°C Infrared Soldering Condition Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Suggestion Profile: Suggestion IR Reflow Profile For Pb Free Process Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical Optical Characteristics At Ta=25℃ Symbol Part No. LTST- Min. IV S220TBKT 28.0 Viewing Angle 2θ1/2 S220TBKT Peak Emission Wavelength λP S220TBKT Dominant Wavelength λd S220TBKT Spectral Line Half-Width Δλ S220TBKT Forward Voltage VF S220TBKT Reverse Current IR S220TBKT Parameter Luminous Intensity Typ. Max. Unit Test Condition 180.0 mcd IF = 20mA Note 1 130 deg Note 2 (Fig.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Bin Code List Forward Voltage Unit: V @20mA Bin Code Min. Max. D7 2.80 3.00 D8 3.00 3.20 D9 3.20 3.40 D10 3.40 3.60 D11 3.60 3.80 Tolerance on each Forward Voltage bin is +/-0.1 volt Luminous Intensity Unit : mcd @20mA Bin Code Min. Max. N 28.0 45.0 P 45.0 71.0 Q 71.0 112.0 R 112.0 180.0 Tolerance on each Intensity bin is +/-15% Dominant Wavelength Unit : nm @20mA Bin Code Min. Max. AC 465.0 470.0 AD 470.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical (25 C Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Suggest Soldering direction: Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-4000 pieces per reel. 3. Minimum packing quantity is 500 pcs for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with ANSI/EIA 481 specifications. Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 5. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below. Circuit model A LED Circuit model B LED (A) Recommended circuit.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 7.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 9. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4.
