SMD LED Product Data Sheet LTST-C19FD1WT Spec No.: DS22-2001-076 Effective Date: 06/22/2010 Revision: G LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Meet ROHS, Green Product. * Full color chip LED. * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Devices Part No. LTST-C19FD1WT Lens White Diffused Source Color Pin Assignment InGaN Blue 1 AlInGaP Red 2 InGaN Green 3 Notes: 1.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings At Ta=25C LTST-C19FD1WT Parameter Unit Blue Green Red Power Dissipation 80 80 75 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 100 100 80 mA Note 1 20 20 30 mA Note 2 10 10 10 mA 0.25 0.25 0.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Suggestion Profile: (1) Suggestion IR Reflow Profile For Normal Process (2) Suggestion IR Reflow Profile For Pb Free Process R e c o m m e n d e d P r o file B e t w e e n A s s e m b le A n d H e a t -R e s is t a n c e L in e T h e P r o file is a v a ila b le t h a t m u s t t o u s e S n A g Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics At Ta=25C LTST-C19FD1WT Parameter Luminous Intensity Symbol IV Blue Green Red MIN. 28.0 71.0 45.0 TYP. - - - MAX. 180.0 450.0 180.0 130 Unit Test Condition mcd IF = 20mA Note 1 deg Note 2 (Fig.6) Viewing Angle 21/2 TYP. Peak Emission Wavelength P TYP. 468 520 611 nm Measurement @Peak (Fig.1) Dominant Wavelength d TYP.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Bin Code List Luminous Intensity Color : Blue , Unit : mcd @20mA Bin Code Min. Max. N 28.0 45.0 P 45.0 71.0 Q 71.0 112.0 R 112.0 180.0 Tolerance on each Intensity bin is +/-15% Luminous Intensity Color : Green , Unit : mcd @20mA Bin Code Min. Max. Q 71.0 112.0 R 112.0 180.0 S 180.0 280.0 T 280.0 450.0 Tolerance on each Intensity bin is +/-15% Luminous Intensity Color : Red , Unit : mcd @20mA Bin Code Min. Max.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25C Ambient Temperature Unless Otherwise Noted) Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-3000 pieces per reel. 3. Minimum packing quantity is 1000 pcs for remainders. 4. The maximum number of consecutive missing lamps is two. 5. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ESD-damaged LEDs will exhibit abnormal characteristics such as high reverse leakage current, low forward voltage, or “ no lightup ” at low currents. To verify for ESD damage, check for “ lightup ” and Vf of the suspect LEDs at low currents. The Vf of “ good ” LEDs should be >2.0V@0.1mA for InGaN product and >1.4V@0.1mA for AlInGaP product. 7.
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 9. Suggested Checking List Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4.
