Datasheet

ManualsBrandsLITE-ON ManualsLEDs & AccessoriesSMD LED 2012 Green 6 mcd 130 ° 10 mA 2.1 V

LITE-ON TECHNOLOGY CORPORATION

Property of LITE-ON Only

Features

* Package in 8mm tape on 7" diameter reels.

* Compatible with automatic placement equipment.

* Compatible with infrared and vapor phase reflow solder process.

* EIA STD package.

* I.C. compatible.

Package Dimensions

Part no. Lens Source Color

LTST-C170GKT

Water Clear

GaP on GaP Green

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is

0.1mm (.004") unless otherwise noted.

Part No. : LTST-C170GKT Page : 1 of 7

BNS-OD-C131/A4

Summary of content (7 pages)

PAGE 1
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Features * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Part no. Lens LTST-C170GKT Water Clear Source Color GaP on GaP Green Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1mm (.004") unless otherwise noted. Part No.
PAGE 2
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Absolute Maximum Ratings At Ta=25℃ Parameter LTST-C170GKT Unit Power Dissipation 100 mW Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) 120 mA Continuous Forward Current 30 mA Derating Linear From 50℃ 0.
PAGE 3
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Electrical Optical Characteristics At Ta=25℃ Parameter Symbol Luminous Intensity Part No. LTST- Unit Test Condition 6.0 mcd IF = 10mA Note 1 Min. Typ. 1.6 Max. IV C170GKT Viewing Angle 2θ1/2 C170GKT 130 deg Note 2 (Fig.6) Peak Emission Wavelength λPeak C170GKT 565 nm Measurement @Peak (Fig.1) Dominant Wavelength λd C170GKT 569 nm Note 3 Spectral Line Half-Width Δλ C170GKT 30 nm Forward Voltage VF C170GKT 2.
PAGE 4
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Bin Code List Luminous Intensity Part Bin Code Min. Max. G 1.6 3.2 H 2.5 5.0 J 4.0 8.0 K 6.3 12.5 L 10.0 20.0 No.
PAGE 5
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Typical (25℃ Part No.
PAGE 6
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No.
PAGE 7
LITE-ON TECHNOLOGY CORPORATION Property of LITE-ON Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-3000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No.