Datasheet

ManualsBrandsLITE-ON ManualsHighPower-LEDsHighPower LED Cold white 700 mW 21 lm 120 ° 3 V 80 mA

Lite-On Technology Corporation

OFFICE

OFFICEOFFICE

OFFICE : 90, Chien I Road, Chung Ho Taipei, Taiwan, R.O.C.

TEL

TELTEL

TEL : +886-2-2222-6181 ~ 8

FAX

FAXFAX

FAX:+886-2-2221-0660, +886-2-2221-2780,+886-2-2225-1518

HIGH POWER LED

LTPL-P00DWS57

DATA SHEET

Summary of content (14 pages)

PAGE 1
Lite-On Technology Corporation OFFICE : 90, Chien I Road, Chung Ho Taipei, Taiwan, R.O.C.
PAGE 2
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 1. Description The LTPL (LiteOn Power LED) is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. It gives you total design freedom and unmatched brightness, creating a new opportunities for solid state lighting to displace conventional lighting technologies.
PAGE 3
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 3. Rating and Characteristics Absolute Maximum Ratings at Ta=25°C Parameter Symbol Rating Unit Po 0.
PAGE 4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electro-Optical Characteristics at Ta=25°C Parameter Symbol 1 Forward Voltage* MIN. TYP. MAX. Test Condition 2.7 3.0 3.6 IF = 40mA* 2.7 3.2 3.8 IF= 75mA* 1 VF 2 V 1 1 21 IF = 40mA* 37 IF = 75mA* 85 IF = 40mA 75 IF = 75mA ΦV Luminous Flux* Unit lm 30.6 1 *1 η Efficiency 1 Reverse Current* lm/W IR Color Rendering Index 2 View Angle* *1 100 1 µA VR = 5V* *1 CRI 70 IF = 75mA 2θ1/2 120 IF = 75mA* Cx 0.
PAGE 5
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves 100% Relative Intensity (%) 80% 60% 40% 20% 0% 400 450 500 550 600 Wavelength (nm) 650 700 750 Fig 1. Relative Spectrum of Emission 0° 100% 90% 30° Relative Intensity (%) 80% 70% 60% 60° 50% 40% 30% 20% 10% 0% 90° 60 30° 0° 50 100 Fig 2. Radiation Characteristics Part No.
PAGE 6
LITE-ON TECHNOLOGY CORPORATION 140 90 120 75 100 Forward Current (mA) Forward Current (mA) Property of Lite-On Only 80 60 40 60 Rth,J-A=60℃/W Rth,J-A=50℃/W 45 Rth,J-A=40℃/W 30 Rth,J-A=30℃/W 15 20 0 0 2.0 2.5 3.0 60 3.5 80 120 Ambient Temperature (Degree) Forward Voltage (V) Fig 4. Forward Current Derating Curve Fig 3. Forward Current 160% 0.335 Chromaticity Coordinates x,y Relative Luminous Flux 100 120% 80% 40% y 0.330 0.325 0.320 x 0.315 0.310 0.
PAGE 7
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 4. Category Code Table Q0 V1 Chromaticity Coordinate Categories Code x y Code x y V1 0.3319 (5700) 0.3320 0.3376 Code x y 0.3446 V2 0.3318 0.3327 V3 0.3267 0.3399 0.3565 (5700) 0.3319 0.3446 (5700) 0.3263 0.3513 0.3616 0.3371 0.3493 0.3320 0.3565 0.3371 0.3493 0.3366 0.3369 0.3319 0.3446 V4 0.3270 0.3285 V5 0.3215 0.3353 V6 0.3222 0.3243 (5700) 0.3267 0.3399 (5700) 0.3207 0.3462 (5700) 0.3215 0.
PAGE 8
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 0.37 5300K 0.36 V1 6000K 0.35 V3 V5 0.34 V2 CY W1 X1 V4 7000K 7000K W3 X3 0.33 V6 W2 X2 W5 X5 W4 X4 0.32 W6 X6 0.31 0.30 0.29 0.30 0.31 0.32 0.33 0.34 0.35 CX Notes 1. The value is all dies operated performance. 2. The chromaticity coordinates (x, y) is derived from the CIE 1931 chromaticity diagram. 3. IS CAS140B is for the luminous flux (lm) and the CIE1931 chromaticity coordinates (x, y) testing.
PAGE 9
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 5.
PAGE 10
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 6. Recommend Solder Pad Solder Pad Design Notes: 1. All dimensions are in millimeters 2. The circle metallization board and lead contact pad is electrically isolated. Part No.
PAGE 11
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 7. Package Dimensions of Tape and Reel Notes: 1. Empty component pockets sealed with top cover tape. 2. 1000 pieces per 7 inch real. (Min. packing quantities are 500 pieces for remainders) 3. The maximum number of consecutive missing LED is two. 4. In accordance with EIA-481-1-L23 specifications. Part No.
PAGE 12
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 8. Cautions Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
PAGE 13
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Reliability Test Test Item Test Condition Test Point Number of Damaged Resistance to Soldering Heat Tsld = 260 C, 10 sec o 1 Time 0 / 22 Solderability Tsld = 245±5 C, 3 sec 1 Time 0 / 22 Room Temperature Operating Life 25 C, IF = 75mA/Die 1000 Hours 0 / 22 High Temperature and High Humidity Life 85 C / 85%RH, IF = 30mA/Die 1000 Hours 0 / 22 Temperature Cycle -40 C / 100 C, 15 min dwell, < 5 min transfer 200 Cycles 0 / 22 Therm
PAGE 14
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage: Use a conductive wrist band or anti-electrostatic glove when handling these LEDs. All devices, equipment, and machinery must be properly grounded. Work tables, storage racks, etc. should be properly grounded.