Datasheet

ManualsBrandsLITE-ON ManualsLEDs & AccessoriesLED wired Yellow Rectangular 2 x 5 mm 3.7 mcd 140 ° 20 mA 2.1 V

LITE-ON TECHOLOGY CORPORATION

Property of Lite-On Only

Features

* Low power consumption.

* Most suitable for use like level indicator.

* Excellent uniformity of light emittance.

* Long life solid state reliability.

* I.C. compatible.

Package Dimensions

Part No. Lens Source Color

LTL-433Y

Yellow Diffused

Yellow

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is

0.25mm(.010") unless otherwise noted.

3. Protruded resin under flange is 1.0mm(.04") max.

4. Lead spacing is measured where the leads emerge from the package.

5. Specifications are subject to change without notice.

Part No. : LTL-433Y Page : 1 of 7

BNS-OD-C131/A4

Summary of content (7 pages)

PAGE 1
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Features * Low power consumption. * Most suitable for use like level indicator. * Excellent uniformity of light emittance. * Long life solid state reliability. * I.C. compatible. Package Dimensions Part No. Lens Source Color LTL-433Y Yellow Diffused Yellow Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm(.010") unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04") max. 4.
PAGE 2
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Maximum Rating Unit 60 mW 60 mA Continuous Forward Current 20 mA Derating Linear From 50℃ 0.25 mA/℃ Reverse Voltage 5 V Operating Temperature Range -55℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Lead Soldering Temperature 260℃ for 5 Seconds [1.6mm(.063") From Body] Part No.
PAGE 3
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Electrical / Optical Characteristics at TA=25℃ Parameter Symbol Min. Typ. IV 1.1 3.7 mcd 2θ1/2 140 deg Peak Emission Wavelength λP 585 nm Dominant Wavelength λd Luminous Intensity Viewing Angle 585 590 Δλ 35 Forward Voltage VF 2.1 Reverse Current IR Capacitance C Spectral Line Half-Width Max. 15 595 Unit nm Test Condition IF = 10mA Note 1,4 Note 2 (Fig.6) Measurement @Peak (Fig.1) Note 3 nm 2.
PAGE 4
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No.
PAGE 5
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
PAGE 6
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only 6. Drive Method An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs connected in parallel in an application, it is recommended that a current limiting resistor be incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
PAGE 7
LITE-ON TECHOLOGY CORPORATION Property of Lite-On Only Suggested checking list : Training and Certification 1. Everyone working in a static-safe area is ESD-certified? 2. Training records kept and re-certification dates monitored? Static-Safe Workstation & Work Areas 1. Static-safe workstation or work-areas have ESD signs? 2. All surfaces and objects at all static-safe workstation and within 1 ft measure less than 100V? 3. All ionizer activated, positioned towards the units? 4.