Datasheet

ManualsBrandsLITE-ON ManualsLEDs & AccessoriesLED wired Red Circular 2.9 mm 60 mcd 60 ° 40 mA 1.8 V

LITE-ON TECHNOLOGY CORPORATION

Property of Lite-On Only

Features

* Designed for ease in circuit board assembly.

* Black case enhance contrast ratio.

* Solid state light source.

* Reliable and rugged.

Package Dimensions

Lamp Part No. Lens Source Color

LTL-4261NR Red Diffused AlGaAs Red

NOTES:

1. All dimensions are in millimeters (inches).

2. Tolerance is ± 0.25mm(.010") unless otherwise noted.

3. The Holder color is black.

4. Specifications are subject to change without notice.

Part No. : LTL-4261NRHBP Page : 1 of 7

BNS-OD-C131/A4

Summary of content (7 pages)

PAGE 1
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Features * Designed for ease in circuit board assembly. * Black case enhance contrast ratio. * Solid state light source. * Reliable and rugged. Package Dimensions Lamp Part No. Lens Source Color LTL-4261NR Red Diffused AlGaAs Red NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25mm(.010") unless otherwise noted. 3. The Holder color is black. 4. Specifications are subject to change without notice. Part No.
PAGE 2
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Absolute Maximum Ratings at TA=25℃ Parameter Maximum Rating Unit 100 mW 200 mA DC Forward Current 40 mA Derating Linear From 50℃ 0.5 mA/℃ 4 V Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Reverse Voltage Operating Temperature Range -40℃ to + 100℃ Storage Temperature Range -55℃ to + 100℃ Lead Soldering Temperature [1.6mm(.063") From Body] Part No.
PAGE 3
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Electrical Optical Characteristics at TA=25℃ Parameter Luminous Intensity Viewing Angle Symbol Min. Typ. IV 19 60 mcd 60 deg 2θ1/2 Max. Unit Test Condition IF = 20mA Note 1,4 Note 2 (Fig.5) Measurement Peak Emission Wavelength λP 660 nm Dominant Wavelength λd 638 nm Δλ 20 nm Forward Voltage VF 1.8 Reverse Current IR Capacitance C Spectral Line Half-Width 30 2.4 V 100 μA pF @Peak (Fig.
PAGE 4
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only Typical Electrical / Optical Characteristics Curves (25℃ Ambient Temperature Unless Otherwise Noted) Part No.
PAGE 5
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only CAUTIONS 1. Application The LEDs described here are intended to be used for ordinary electronic equipment (such as office equipment, communication equipment and household applications).
PAGE 6
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 7. ESD (Electrostatic Discharge) Static Electricity or power surge will damage the LED. Suggestions to prevent ESD damage. ■ Use a conductive wrist band or anti-electrostatic glove when handling these LEDs. ■ All devices , equipment , and machinery must be properly grounded. ■ Work tables , storage racks , etc. should be properly grounded .
PAGE 7
LITE-ON TECHNOLOGY CORPORATION Property of Lite-On Only 8.