Datasheet

LITE-ON TECHNOLOGY CORPORATION
Property of LITE-ON Only
ABSOLUTE MAXIMUM RATING
( Ta = 25°C )
PARAMETER
SYMBOL RATING UNIT
Forward Current I
F 60 mA
Reverse Voltage V
R 6 V
INPUT
Power Dissipation P 100 mW
Collector - Emitter Voltage V
CEO
300 V
Emitter - Base Voltage V
EBO
7 V
Collector - Base Voltage V
CBO
300 V
Emitter - Collector Voltage V
ECO
7 V
Collector Current I
C
100 mA
OUTPUT
Collector Power Dissipation P
C
150 mW
Total Power Dissipation P
tot
250 mW
*1 Isolation Voltage V
iso
5,000 Vrms
Operating Temperature T
opr
-55 ~ +100
°C
Storage Temperature T
stg
-55 ~ +150
°C
*2 Soldering Temperature T
sol
260
°C
*1. AC For 1 Minute, R.H. = 40 ~ 60%
Isolation voltage shall be measured using the following method.
(1) Short between anode and cathode on the primary side and between collector and
emitter on the secondary side.
(2) The isolation voltage tester with zero-cross circuit shall be used.
(3) The waveform of applied voltage shall be a sine wave.
*2. For 10 Seconds
Part No. :
H11D1 ( M, S, S-TA1 )
Page :
5of9
BNS-OD-C131/A4