LITE-ON TECH. CORP.
PRODUCT SPECIFICATION WHDI Transmitter Board WV300A Amimon AMN2110 + Amimon AMN3110 Version 1.2 This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC. Liteon semi-P/N: B853HZ000G Change History: Revision Draft Version 1.0 Date 2010/07/12 2011/05/26 Author Kenny Su Kenny Su Version 1.1 Version 1.
PRODUCT SPECIFICATION WHDI Transmitter Board WV300A Amimon AMN2110 + Amimon AMN3110 Version 1.2 Networking B.U. Lite-on Technology Corporation 4F, 90, Chien I Rd. Chung Ho, Taipei Hsien 235, Taiwan, R.O.C. Phone: 886-2-2222-6181 Fax: 886-2-2221-5288 Contact: Product Marketing ML Wu #8266 E-mail: ML.Wu@LiteON.Com Customer Approval: (Signature) (Title) (Company) (Date) (Please Sign Back by FAX.
CONTENT PRODUCT FEATURES ....................................................................................................................4 MAIN CHIPSET.................................................................................................................................5 FUNCTIONAL SPECIFICATIONS.................................................................................................5 PCBA MECHANICAL ......................................................................................
PRODUCT FEATURES World band frequency 5150~5250;5725~5850MHz operation Coexists with 802.11a/n and 5.8GHz cordless devices 128/256-bit AES based encryption Supports 20 and 40 MHz channels for supreme video quality and high rate video/audio Signals WHDI 1.0 compliance, including HDCP 2.0 Support HDMI 1.4a video format and HDCP 1.2 with video encryption.
MAIN CHIPSET Amimon AMN2120 + AMN3110 FUNCTIONAL SPECIFICATIONS WHDI Function Standard WHDI 1.0 Bus Interface HDMI Data Rate 20MHz DL (Tx to Rx): 31.5 Mbps 40MHz DL (Tx to Rx): 63 Mbps Modulation Scheme Uses 18MHz or 40Mhz bandwidth and is carried over the 5GHz unlicensed band Frequency Range 5150~5250; 5725~5850MHz Operating Voltage 5 V ±5% supply voltage Security 128/256-bit AES based encryption Power Consumption 7.
PCBA MECHANICAL WV300A Specification Page 6/11 LTC Network Access Confidential 2011/08/23
BLOCK DIAGRAM ENVIRONMENTAL Operating Operating Temperature: 10-35ºC ambient in still air (outside of case) Relative Humidity: 5-90% (non-condensing) Storage Temperature: -20 to 70 C Relevant Humidity: 5-95% (non-condensing) WV300A Specification Page 7/11 LTC Network Access Confidential 2011/08/23
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Radio Frequency (RF) Exposure Information The radiated output power of the Wireless Device is below the Industry Canada (IC) radio frequency exposure limits.
rendez-vous sur : http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user. This device is intended for OEM integrators only. Please See the full Grant of Equipment document for other restrictions. This device must be operated and used with a locally approved access point. This device is operation in 5.15 – 5.
