User's Manual

Page 3/10
 SPI NOR 32M Bytes
 DDR2: 128MBytes
2.2 Enclosure and Mechanical
The dimension for the WP838I is as below:
 PCB Dimension (L x W x D): 156×138.5(Note: this is the target dimension, will be
inplemented at next stage)
 ME Dimension (L x W x D): 177 × 155 × 42(Note: this is the target dimension, will
be inplemented at next stage)
 Default 3× RJ45 connectors
 1× 10/100/1000Mbps Full/Half Duplex Ethernet;
 1× 10/100/1000Mbps Full/Half Duplex with POE;
 1× RS232 console in RJ45 connector
 Default 5×LEDs
 Default One USB 2.0 port;
 12V DC input;
 Factory default reset; (Note: can be removed according to customer’s demand)
 Plastic bottom case for thermal radiating
Figure-03 Reference for ID design
(Note: It is required that bottom cover contains cable concealment and the place to integrate