WP8331 802.11ac Dual Band PoE Access Point External Specification Version: V0.4 This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
Specification Revision History Version Revised Date Person Name Content Revised 0.1 0.2 0.3 2016/05/13 2016/05/20 2016/08/03 Flora Yu Flora Yu Flora Yu 0.
1 Product Descriptions The WP8331 is a two radios, dual band, 802.11ac access point. It provides powerful WLAN supporting wireless speed up to 300Mbps on 2.4GHz and 867Mbps on 5GHz, one Ethernet port to connect to the backbone network, one Ethernet ports can be aggregated to connect to one computer through the network cables. Besides, the WP8331 supports 802.3at PoE PD to allow the device powered by PoE switch remotely.
802.11ac 2.4GHz on board 802.11ac 5GHz on board BT/BLE on board 2 internal antennas – 2.4G antenna 2 internal antennas – 5G 1 internal antenna – BT/BLE IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac compliant Wireless Data Rate: 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 802.11g: 54, 48, 36, 24, 18, 12, 9 & 6 Mbps 802.11b: 11, 5.5, 2 & 1 Mbps 802.11n : 20 MHz BW: 130, 117, 104, 78, 52, 39, 26, 13Mbps 40 MHz BW: 270, 243, 216, 162, 108, 81, 54, 27 Mbps 802.
Rx sensitivity: 2.4GHz band, 802.11b@11Mbps: -91 +/- 2dBm 802.11g@54Mbps: -76 +/- 2dBm 802.11n MCS7: -73 +/-2 dBm 5GHz band, 802.11a @6Mbps: -93+/- 2dBm 802.11a @54Mbps: -76+/- 2dBm 802.11n MCS7 : -72 +/- 2dBm 802.11ac MCS9:-64 +/- 2dBm BT Peak Gain: 2.6 dBi 2.4G Ant _1: Peak Gain: 4.7 dBi Ant _2: Peak Gain: 3.3 dBi 5G 5180~5240 MHz Ant _1: Peak Gain: 3.8 dBi Ant _2: Peak Gain: 5.0 dBi 5260~5320 MHz Ant _1: Peak Gain: 4.3 dBi Ant _2: Peak Gain: 5.0 dBi Power Directional Gain: 4.
Green (5G) WLAN Amber (2.4G) Solid Light Connect to WLAN port Blinking WLAN activity present Light off No activity or power off Solid Light Connect to WLAN port Blinking WLAN activity present Light off No activity or power off Device connected to LAN port at 10/100/1000Mbps LAN Activity present Not Connected Solid Light Per port LAN Green Blinking Light off 2.
3 Mechanical and Environment Design 3.1 Case (details refer to ME drawing separately) A. ID/Tool (leverage WP8336-AB) This ID is a small form factor within 146x146mm. The bottom ID/ME shall seamlessly (without tooling updates) support potential different styles of top cover for customers. The ID has a Kensington lock hole on the enclosure. B. I/O port (back view, ordering from right to left) DC IN RESET LAN1 LAN2 (PoE) C. Mounting Kit 1.
3.2.2 Operation Temperature - Temp: 0° C to +45° C (+32° F to +113° F) - Humidity: 5% ~ 95%R.H non-condensing 3.2.
FCC Statement: Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
IC Statement: This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250‐5350 MHz, 5470‐5600 MHz et 5650‐5725 MHz. The maximum antenna gain permitted for devices in the bands 5250‐5350 MHz and 5470‐5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit. le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5250‐5350 MHz et 5470‐5725 MHz doit se conformer à la limite de p.i.r.e.
