User's Manual

8
2.2 Verify the IP address setting
Your need to configure your PC’ s network settings to an IP
address. Computer use IP addresses to communicate with
each other across a network, such as the Internet.
1. From the taskbar, click the Start button, select
Settings > Control Panel. From there, double-click
the Network connections icon.
2. Right click the Local Area Connection icon
Properties , select the
TCP/IP line for the appli-
cable Ethernet adapter. Then, click the Properties
button.
3. Click the IP Address tab page, select USE the
following IP address, type 192.168.1.1~192.168.
1.254
( but, 192.168.1.240 for this Access Point use)
in the IP Address field and
255.255.255.0 in the
Subnet Mask field, then click OK button.