User's Manual

12
This is the name of the wireless access point that
this bridge will associate to. Leave this field blank to
associate to any access point.
 Desired BSSID
This provides manual selection for the desired Access
Point to join with. The SSID for the Access Point still
has to match. You can copy and paste the desired MAC
address from the Info page.
 Channel
This is the radio channel that is used in ad-hoc mode.
This setting has no effect in infrastructure mode. If you
experience interference (e.g. lost connections or slow
data transfers) you may need to try different channels
to see which is the best.
 Transmission rate (Mbits/s)
This is the speed at which the bridge will transmit
data. Normally you should select ‘best’ here, although
if your wireless network is unusually noisy or quiet you
may which to use a fixed low or high rate.
 Wireless Mode
Wireless mode allows the user to select whether this
Bridge will connect to an 802.11g only network, an
802.11b only network, or both types of networks.