User's Manual

20
 802.1X configuration
When 802.1X authentication is enabled then the AP
will authenticate clients via a remote RADIUS server.

WPA Pairwise Cipher Type: Currently TKIP is the only
permitted setting.
 WPA Group Key Update Interval.
 WEP configuration
WEP is the wireless encryption standard. To use it
you must enter the same key(s) into the access point
and the wireless stations. For 64 bit keys you must enter
10 hex digits into each key box. For 128 bit keys you
must enter 26 hex digits into each key box. A hex digit is
either a number from 0 to 9 or a letter from A to F. If
you leave a key box blank then this means a key of all
zeros.

802.1X Enable.

Authentication timeout(mins).

RADIUS server IP address.

RADIUS server port number.

RADIUS server shared secret.

MAC Address Authentication.
 Enable WEP : Check this box to enable WEP. For the
most secure use of WEP, also select “Deny Unencrypted
Data” and set Authentication to “Shared Key” when WEP
is enabled.
 WEP key lengths: Select the key size. This length
applies to all keys.

WEP key.

Default WEP key to use: Select the key to be used