User Manual

Wireless LAN 802.11a/b/g Device

The Wireless Network Connection dialog will appear.

5. Select the Wireless Network of your choice by

clicking on its name and the entire block will

become highlighted

6. Select Connect in the lower right corner

The Wireless Network Connection dialog box will

appear as shown below.

7. Enter your Network Key (WEP Key or WPA Key) for

your Wireless Network

8. Input the Network Key a second time into the

“Confirm network key” box

Note:

If your network is using WEP encryption, then

a HEX or an ASCII format is necessary when entering

your Network key:

z HEX: 10 Characters in HEX notation for 40 bit or

26 characters for 128 bit encryption.

z ASCII: 5 Characters for 40 bit or 13 characters for

128 bit encryption.