User Manual

Wireless LAN 802.11a/b/g Device
2
Installing the Wireless LAN 802.11a/b/g
Device Antenna
The Wireless LAN 802.11a/b/g Device is embedded in
the PC and needs the antenna supplied with your PC
to be connected. Once connected, your PC is ready to
begin functioning in station mode (as a client) with
your Wireless Local Area Network.
Note:
It is assumed that there is an existing wireless
LAN network with an Internet connection (please
consult your ISP for further information).
Package content consist of an antenna with a
connector located at the end (A) that screws into the
antenna jack located on the back of the PC (B).
A) Antenna Installation
1. Screw the antenna connector (A) to the antenna
jack (B) located on the back of the PC.
2. Place the PC on a table or place the antenna in an
elevated and open area to achieve the best
wireless performance.
A
B
B
OR
A