User Manual

Wire le ss LAN 802.11b /g De vic e
14
3.3.1 WEP: Setting the Net work Key (Net work Security)
This section gives instruction on how to correctly set up WEP security on your HP PC. If you
are currently running a WPA/WPA2 enabled device, skip to Section 3.3.2, WPA/WPA2:
Setting the Network Key (Network Security).
In order to set up your Network Key (WEP security feature) you will need to do the
following:
1. Open the Wireless Network Connection Properties dialog box:
 Right click on the Wireless Networks icon in the system tray.
 Select View Available Wireless Networks from the Wireless Networks I
con menu.
The Wireless Network Connection dialog box appears.
 Select Change advanced settings on the left side of the dialog box.
The Wireless Network Connection Properties dialog box appears.
 Select the Wireless Networks tab as shown in figure 10 below.
Figure 10: Manually adding a Wireless Net work
2. Select Add under the Preferred networks selection box.
The Wireless Network Properties dialog box appears.