User Manual WLAN Module WN4640R Liteon P/N : AAZ100136D0 Version 1.0 Author: Kaysa Lee Change History Revision Version 1.0 Date Author Change List 2015 / 06 / 03 Kaysa Lee Initial release * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
CONTENT 1 PRODUCT OVERVIEW ...................................................................................................................... 3 1.1 DESCRIPTION ............................................................................................................................. 3 1.2 FEATURES .................................................................................................................................. 3 1.3 GENERAL SPECIFICATIONS ..........................................
1 PRODUCT OVERVIEW 1.1 DESCRIPTION WN4640R is a WLAN module which using MTK Chipset MT7603U 1.2 FEATURES Operate at 2.4GHz band 150Mbps PHY Rate Support 2T2R Modes 20MHz Bandwidth Support USB 2.0 support for date rates up to 12Mbps full speed and 480Mbps high speed IEEE standards support: IEEE 802.11b/g and 802.11n 802.11i- WEP 64/128, AES, TKIP RoHS compliance Low Halogen compliance 1.3 GENERAL SPECIFICATIONS Main Chipset MT7603U Standard IEEE 802.11b/g/n Bus Interface USB 2.
1.4 BOARD OUTLINE Dimension Tolerance : +/- 0.
1.6 WTB CONNECTOR 1.
2 Appearance, Marking 2.
FCC WARING STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
Information to OEM integrator The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user manual of the end product. The user manual which is provided by OEM integrators for end users must include the following information in a prominent location. 1.
IC WARING STATEMENT Canada, Industry Canada (IC) Notices This Class B digital apparatus complies with Canadian ICES-003 and RSS-247. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Cet appareil numerique de classe B est conforme aux normes canadiennes ICES-003 et RSS-247.
NCC Warning Statement
