USER MANUAL 802.11n, 2.4G 1T1R Wireless LAN USB Module WN4615L Realtek RTL8188ETV Version 1.1 Change History Revision Version 1.0 Date 2014/05/05 Author Ben J Chen Version 1.1 2015/01/07 Ben J Chen Change List Preliminary Update Power Consumption Update Pin Assignment * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
CONTENT PRODUCT FEATURES .................................................................................................................... 4 WI-FI FEATURE ...................................................................................................................................... 4 PRODUCT SPECIFICATIONS ........................................................................................................ 5 MAIN CHIPSET ..........................................................................
PRODUCT FEATURES Wi-Fi Feature Operate at ISM frequency Band (2.4GHz) IEEE Standards Support, 802.11b, 802.11g and 802.11n CMOS MAC, Baseband PHY, and RF in a single chip for IEEE 802.11b/g/n compatible WLAN Complies with USB Specification 2.
PRODUCT SPECIFICATIONS MAIN CHIPSET Realtek RTL8188ETV FUNCTIONAL SPECIFICATIONS Wi-Fi Function Standard IEEE802.11b; IEEE 802.11g; IEEE 802.11n Bus Interface USB 2.0 Data Rate 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 7 for HT20MHz MCS 0 to 7 for HT40MHz Media Access Control CSMA/CA with ACK 802.11b: CCK, DQPSK, DBPSK 802.11g: Modulation Techniques 64QAM, 16QAM, QPSK, BPSK 802.
Security -68 dBm@MCS7 40MHz -65 dBm@MCS7 WEP 64&128 bit, WPA, WPA-PSK, WPA2, WPA2-PSK, WPS, IEEE 802.1X, IEEE 802.11i Operating Voltage 3.3 V ±9% I/O supply voltage OS Supported Microsoft Windows Win7/Win8/Win8.1; Linux based Power Consumption Test Condition: - Operate at HT40 - File Transmission Antenna Type Average TX Mode: 300 mA RX Mode: 180 mA Standby Mode: 160 mA Max 600mA Printed Antenna INRUSH CURRENT The MAX is about 1.45A and during time is about 1.7us.
PIN ASSIGNMENT Pin. 1 2 3 4 Pin Define +3.
MECHANICAL BLOCK DIAGRAM Page 8/12
PRINTED ANTENNA SPEC Page 9/12
MODULE PHOTO Top Side Bottom Side Page 10/12
EEPROM INFORMATION Reg Domain WorldWide13 Channels 1-11 with active scan, 12-13 with passive scan 0x20 Vendor ID 0x0BDA Device ID 0x0179 ENVIRONMENTAL OPERATING Operating Temperature: 0 to 70 C (32 to 158 F) Relative Humidity: 5-90% (non-condensing) STORAGE Temperature: -40 to 80 C (-40 to 176 F) Relative Humidity: 5-95% (non-condensing) PACKING DRAWING Tray Page 11/12
Page 12/12
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digi tal device, pursuant to part 15 of the FCC rules.
transmitter product procedures. 2. Only those antennas with same type and lesser gain filed under this FCC ID numbe r can be used with this device. 3. The regulatory label on the final system must include the statement: “Contains FCC ID:PPQ-WN4615L “. 4.
