PRODUCT SPECIFICATION 802.11a/b/g/n/ac, 2T2R Wireless LAN USB2.0 Module WN4510L Realtek RTL8812AU Version 1.0 User Manual * This document contains confidential proprietary information and is property of LTC.
CONTENT FCC WARING STATEMENT .......................................................................................................... 3 IC WARING STATEMENT .............................................................................................................. 4 PRODUCT FEATURES .................................................................................................................... 5 PRODUCT SPECIFICATIONS ..................................................................................
FCC WARING STATEMENT FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: "Contains FCC ID: PPQ-WN4510L ” Information for the OEMs and Integrators The following statement must be included with all versions of this document supplied to an OEM or integrator, but should not be distributed to the end user.
Informations concernant l'exposition aux fréquences radio (RF) La puissance de sortie émise par l’appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'Industry Canada (IC). Utilisez l’appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.
PRODUCT SPECIFICATIONS MAIN CHIPSET MAC/ Baseband/ RF: Realtek 8812AU-VS-CG FUNCTIONAL SPECIFICATIONS WiFi Function Standard IEEE802.11a; IEEE802.11b; IEEE 802.11g; IEEE 802.11n; IEEE802.11ac Bus Interface Universal Serial Bus (USB2.0) Data Rate 802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11b: 11, 5.5, 2, 1 Mbps 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps 802.11n: MCS 0 to 15 for HT20MHz MCS 0 to 15 for HT40MHz 802.
Receiver Sensitivity Security 802.11b: 16 dBm@1Mbps 16 dBm@11Mbps 802.11g: 16 dBm@6Mbps 14 dBm@54Mbps 802.11n(2.4GHz): 20MHz: 16dBm@MCS0 13dBm@MCS7 13dBm@MCS15 40MHz: 16dBm@MCS0 13dBm@MCS7 13dBm@MCS15 802.11n(5GHz): 20MHz: 15dBm@MCS0 13dBm@MCS7 40MHz: 15dBm@MCS0 13dBm@MCS7 802.11ac: 20MHz: 13dBm@MCS8 40MHz: 13dBm@MCS9 80MHz: 13dBm@MCS9 802.11a: -85 dBm@6Mbps -70 dBm@54Mbps 802.11b: -83 dBm@11Mbps 802.11g: -86 dBm@6Mbps -70 dBm@54Mbps 802.11n(2.4GHz): 20MHz -69 dBm@MCS7 40MHz -66 dBm@MCS7 802.
Operating Voltage 5V ±10% I/O supply voltage OS Supported Microsoft Windows Win7/Win8/Win8.
CONNECTOR SPEC Page 9/11
PIN ASSIGNMENT Pin.
BLOCK DIAGRAM EEPROM INFORMATION World Wide_13 Reg Domain 0x7F Vendor ID 0x0BDA Product ID 0x881A ENVIRONMENTAL Operating Operating Temperature: 0 to 70 C Relevant Humidity: 5-90% (non-condensing) Storage Temperature: -40 to 85 C (-40 to 185 F) Relevant Humidity: 5-95% (non-condensing) Page 11/11
