User's Manual

OEM Integrator Checklist
The party below will implement the LITE-ON Module in host systems in accordance with the instructions
specified in this document and the documents referenced herein.
1. The OEM integrator will ensure the Module is integrated in a host systems using only the approved
antenna model(s) described in this document.
2. The OEM integrator will ensure the antenna placement inside the host system will maintain the
required spacing to end user for RF Exposure compliance, as specified in this document.
3. If other radios are integrated inside the host with the LITE-ON Module, the OEM integrator will contact
its test lab, TCB or LITE-ON to determine if additional FCC compliance evaluation is required to meet FCC
collocation rules.
4. The OEM integrator will ensure end user documentation will contain the specified regulatory wording
and ensure the host system and the Module itself are labeled as specified in this document.
5. The OEM integrator will ensure the Module is programmed in the factory with compliant transmit
power not exceeding the levels specified in this document.
LITE-ON requests that the OEM integrator acknowledge its receipt of this document and the above
instructions. You may contact LITE-ON with any questions concerning this document or the
responsibilities of the OEM integrator.