PRODUCT SPECIFICATION MODEL NAME: MODULE PN: WCBN3603A-SS AAZ100075G0 SEC CODE: Version 1.0 TOP Bottom * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
CONTENT 1. CHANGE HISTORY ..................................................................................................................... 3 2. LOCATION INFORMATION FOR MANUFACTURING FACTORY .................................. 3 3. GENERAL DESCRIPTION .......................................................................................................... 4 BT FEATURE: .......................................................................................................................................
1. Change History Revision Version 1.0 Date 2014/06/18 Author Kaysa Lee Change List Preliminary 2.
3. General Description BT Feature: Bluetooth V4.0 LE, V3.0 HS, Bluetooth V2.1+EDR system, backwards compatible with BT version of 1.1, 1.2 and 2.0 Support Class II (TX power maximum to +4dBm) BT transmission speed including 1M, 2M and 3Mbps EDR operations Support for Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function Support for SCATTERNET and PICONET HCI USB interface to work with Windows upper layer stack WiFi Feature: Operate at ISM frequency Band(2.
4. CTQ (Critical To Quality), Main Control Items 5. Electrical Characteristics Main chipset Qualcomm Atheros QCA9565 Functional Specifications BT Function Standard Bluetooth V4.0LE, V3.0 HS, V2.1+EDR, Bus Interface USB Data Rate 1 Mbps, 2Mbps and Up to 3Mbps Modulation Scheme GFSK, π/4-DQPSK and 8-DPSK Frequency Range 2.402~2.480 GHz Transmit Output Power -6 ≤ Output Power ≤ +4; Class 2 Device Receiver Sensitivity < 0.
16 dBm@48Mbps 14 dBm@54Mbps 802.11n / HT20: 17 dBm@MCS0,1,2,3,4 16 dBm@MCS5 15 dBm@MCS6 13 dBm@MCS7 802.11n / HT40: 16 dBm@MCS0,1,2,3,4 16 dBm@MCS5 15 dBm@MCS6 13 dBm@MCS7 802.11b: Less than -76dBm 802.11g / 11a: Less than -82dBm @ 6Mpbs Less than -65dBm @54Mbps 802.11n: Receive Sensitivity HT20 Less than -82dBm @ MCS0 Less than -64dBm @ MCS7 HT40 Less than -79dBm @ MCS0 Less than -61dBm @ MCS7 Security WPA, WPA2, WPS, IEEE 802.1X, IEEE 802.11i Common Function Operating Voltage 3.
. Internal Block Diagram 8.
9.
10.
11.
12. Reflow Profile 13.
14. Reliability Test Report 15. Mechanical Characteristics Tolerance: +/- 0.1mm 16. Structure and Material 17.
Page 13/18
Page 14/18
18. Marking 19.
20. Lead Free This product is a module not IC which has no outside terminal, the contact with customer platform is through the bottom pad. We don’t do whisker test for module. 21. RoHS Qualification Report 22. Sample History 23.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change.
