Launch the Play-F App and follow the instructions. Chorus PR1 Receiver Set-Up 1 For best results place your Chorus PR1 Receiver near your wireless access point during set-up. Move the receiver to the desired location afterwards. Note that multiple speakers and receivers can be set-up at one time. Your router should be connected to the interment. The Play-F App will ask you to enter your WI-Fi network's password. After connecting, your Play-F receiver will perform a software update.
Configuration du Chorus PR1 Recercler 1 Pour de meilleurs résultats, veuillez installer votre Chorus PR1 Recercler & proximité du point d’accès au moment de la configuration. Vous pourrez ensuite déplacer le récepteur & 'endroit désiré. Veuillez noter que vous pouvez configurer simultanément plusieurs enceintes et plusieurs récepteurs. Voler routeur doit aire connecte & internet. Branchez & votre récepteur "adaptateur secteur fourni. Votre récepteur s'allume automatiquement.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment his been tested and found to comply with the limits for & Class B digital device, pursuant to Part 15 of the FOG Rules. Tess limits are designed 10 provide reasonable protection against harmful Interference In a residential Installation. This equipment generates, uses and can radiate radio frequency energy and, If not Installed and used In accordance with the Instructions, may cause harmful Interference to radio communications.
