User's Manual

- 15 -
Switching the Presenter on or off
To switch on:
Press and hold the power on/off button for approximately 2 seconds until the white LED
lights.
To switch off:
Press and hold the power on/off button for approximately 4 seconds until the blue LED
flashes quickly 5 times.
Pairing procedure
Your BSD-500 Bluetooth Presenter needs to be paired to another Bluetooth device (e.g.
Mobile phone) before it can be used. This is a two part process; one part is carried out on
the Presenter and the other is carried out on the other Bluetooth device. Note that different
Bluetooth devices use a different method to go through the pairing process.
To pair your BSD-500 Bluetooth Presenter:
1. With your Presenter turned off, press and hold the power on/off button for
approximately 2 seconds until the LED flashes quickly between blue and orange,
which indicates that the Presenter is in discovery/pairing mode.
2. Use your other Bluetooth device’s menu to search for the BSD-500. When it has been
found, confirm that you want to pair it and your other Bluetooth device together. If you
are unsure how to go through the pairing process on your other Bluetooth device,
please consult its user manual.
3. When asked for a pin button, enter “0000”.
Note: There is usually a time limit to pair devices, for example 1 minute.