User's Manual

- 6 -
Switching the headset on or off
To switch on:
Press and hold the talk key for 3 seconds until the blue LED
turns on.
To switch off:
Press and hold the talk key for 3 seconds until the orange LED
flashes.
Pairing Procedure
Your BMH-10x Bluetooth
®
headset needs to be paired to your
mobile phone before it can be used. This is a two part process;
one part is carried out on the headset and the other is carried out
on the mobile phone. Note that different mobile phones use a
different method to go through the pairing process.
To pair your BMH-10x Bluetooth
®
headset:
1. With your headset turned off, press and hold the talk key for 6
seconds. The LED will alternate rapidly between blue and
orange, which indicates that the headset is in pairing mode.
2. Use your phone’s menu to search for Bluetooth
®
audio
devices. The phone should indicate it has found the
"BMH-10x" headset. Confirm that you want to pair your mobile
phone and headset together. If you are unsure how to go
through the pairing process on your mobile phone, please
consult its user manual.
3. When asked for a pin key, enter: “0000”. Your phone will
confirm that pairing has been successful.
Note that there is usually a time limit to pair devices, for example
2 minutes.
Phone call use