User's Manual

Getting the O-90 Online
Step 1: Power up
Plug one end of the Ethernet cable into the PoE switch or injector and plug the other
end into the LAN1 (PoE) on the O-90. Make sure the PoE source you are using is
turned ON.
Step 2: Connect to the network
As you are using PoE, the O-90 should already be connected to your network.
Step 3: Check the LED status
Wait for a few minutes till the
Power (PWR) LED and LAN1 (PoE) LED
turn solid GREEN, which indicates that
the O-90 is online and operational.