O-90 AirTight Access Point / Sensor Quick Start Guide Package Contents You should have received the following components in your O-90 package.
Mounting the O-90 Wall Mount: AirTight logo facing away from the wall Pole Mount: AirTight logo facing away from the wall
Getting the O-90 Online Step 1: Power up Plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the LAN1 (PoE) on the O-90. Make sure the PoE source you are using is turned ON. Step 2: Connect to the network As you are using PoE, the O-90 should already be connected to your network. Step 3: Check the LED status Wait for a few minutes till the Power (PWR) LED and LAN1 (PoE) LED turn solid GREEN, which indicates that the O-90 is online and operational.
Troubleshooting After the O-90 is powered ON and connected to Ethernet, if the status of Power (PWR) LED is not Solid Green, it indicates that the AP is not able to function normally. The following guidelines may help you to quickly diagnose and fix the problem. LED Status What does it mean? Power (PWR) 2.
O-90-E AirTight Access Point / Sensor Quick Start Guide Package Contents You should have received the following components in your O-90-E package.
Mounting the O-90-E Wall Mount: AirTight logo facing away from the wall Pole Mount: AirTight logo facing away from the wall
Getting the O-90-E Online Step 1: Power up Plug one end of the Ethernet cable into the PoE switch or injector and plug the other end into the LAN1 (PoE) on the O-90-E. Make sure the PoE source you are using is turned ON. Step 2: Connect to the network As you are using PoE, the O-90-E should already be connected to your network. Step 3: Check the LED status Wait for a few minutes till the Power (PWR) LED and LAN1 (PoE) LED turn solid GREEN, which indicates that the O-90-E is online and operational.
Troubleshooting After the O-90-E is powered ON and connected to Ethernet, if the status of Power (PWR) LED is not Solid Green, it indicates that the AP is not able to function normally. The following guidelines may help you to quickly diagnose and fix the problem. LED Status What does it mean? Power (PWR) 2.
Federal Communication Commission Interference Statement FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Industry Canada Statement Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d’Industry Canada (IC) Cet appareil est conforme avec Industrie Canada exemptes de licence RSS standard(s).
