User's Manual

MZ0100S-0 Product Specification Page 3/9
LTC Network Access Confidential
1. Product Overview
1.1 Description
The MZ0100S-0, ZigBee Module is using 32-bit ARM® Cortex®-M3 microprocessor and
an integrated ultra-low power 2.4GHz ISM band, compliance with IEEE 802.15.4
transceiver. These ZigBee Module is available in 33-pin stamp holes packages with up to
512KB Flash, and 64KB of SRAM. MZ0100S is based on SILICON LABS EM3585 single chip
ZigBee solution the Wireless sensor networking, Industrial control, Machine-to-Machine
(M2M) and emerging Internet of Things (IoT) markets.
1.2 Features
 32-bit ARM Cortex-M3 Processor
 Frequency 2.4 GHz, IEEE 802.15.4 compliant RF transceiver
 64KB of RAM
 512KB Flash
 Support on-chip OTA, over-the-air, upgrade
 Excellent Receiver Sensitivity of -100dBm
 Programmable Output Power up to +7dBm, configurable
 Operating temp: -40~85
o
C
 Total 33-pin Stamp Holes, SMT
 Type A form factor: 24x17mm
 RoHS Compliant
1.3 General Specifications
RF Chipset SILICON LABS EM3585
Standard 2.4 GHz IEEE 802.15.4-2003 ZigBee
Bus Interface Data: SPI, UART and I2C (SW configurable)
RF Frequency Range 2.405~2.475 GHz (channel 11 -26)
Power Amplify N/A
Transmit Output Power +7dBm
Receiver Sensitivity -100dBm
Operating Voltage 2.1V~3.6V
Operation temperature -40~+85
o
C
Power Consumption
Transmit Mode: TBC
Receive Mode: TBC
Deep Sleep Mode: 7uA
Antenna Type
1. Print Antenna
2. Feed Point