User's Manual

ManualsBrandsLITE-ON Technology ManualsElectronicsLow Power Wi-Fi Module

MW0100R Product Specification Page 1/9

LTC Network Access Confidential



PRODUCTSPECIFICATION



MW0100R

LowPowerWi‐FiModule

Version1.1



Author:RockyCCChenEditor: 

ProjectLeader:Approvedby:



ChangeHistory

Revision Date Author ChangeList

1.0 May5

,2015 RockyCCChen Draft

1.1 May25

,2015 RockyCCChen UpdateTx,Rxandpowerconsumption

  

*ThisdocumentcontainsconfidentialproprietaryinformationandispropertyofLTC.Thecontentsof

thisdocumentshouldnotbedisclosedtounauthorizedpersonswithoutthewrittenconsentofLTC. 

Summary of content (9 pages)

PAGE 1
PRODUCT SPECIFICATION MW0100R Low Power Wi‐Fi Module Version 1.1 Author : Rocky CC Chen Project Leader: Editor : Approved by: Change History Revision 1.0 1.1 Date May 5th, 2015 May 25th, 2015 Author Rocky CC Chen Rocky CC Chen Change List Draft Update Tx, Rx and power consumption * This document contains confidential proprietary information and is property of LTC. The contents of this document should not be disclosed to unauthorized persons without the written consent of LTC.
PAGE 2
CONTENT 1. PRODUCT OVERVIEW ...................................................................................................................... 3 1.1 DESCRIPTION.............................................................................................................................. 3 1.2 FEATURES ................................................................................................................................... 3 1.3 GENERAL 1.4 BLOCK DIAGRAM ...................................
PAGE 3
1. Product Overview 1.1 Description MW0100R is Low Power Wi‐Fi Module uses IEEE 802.11 b/g/n standard to network the low‐power mobile application on Apple HomeKit platform. It also integrates ARM‐Cortex M3 MCU, WLAN MAC, 1T1R capable WLAN baseband, internal memories and PCB Antenna. Developers can be benefit from the quick‐installed module without RF expertise to enter HomeKit application market. 1.2 Features  Apple HomeKit Compatible  IEEE 802.
PAGE 4
Power Consumption  MCS=7 PER @ ‐85dBm ± 1dB 802.11g  54Mbps PER @ ‐75dBm ± 1dB 802.11b  11Mbps PER @ ‐70dBm ± 1dB Deep Sleep: 0.04mW Idle: 8.2mW Rn in Active Clock: 56mW 11n RX Mode: 237mW 11n TX Mode: 690mW Network features TCP, UDP, DHCP, ARP, HTTP, SSL, and DNS Encryption Supports IEEE 802.11 WEP, WPA, WPA2 Security Serial Data Interface I2C ,UART,SPI Antenna Printing ANT or EXT ANT Operating Temperature 0 oC ~70 oC Dimensions 24mm x17mm Power Requirements 3.
PAGE 5
1.4 Block Diagram 2. Pin Assignment and Description Pin Number 1 2 NC NC PIO_4 NC NC Pin Description Ground Ground SPI_MISO when pin25 is H. GPIO8 when pin25 is L. SPI_CLK when pin25 is H. GPIO5 when pin25 is L.
PAGE 6
15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 PIO_8_MISO NC NC PIO_3 PIO_0/UART_TX PIO_1/UART_RX PIO_6_CS NC NC PIO_7_MOSI SPI_PIO#_SEL WAKEUP NC AIO_2 AIO_1 AIO_0 GND RF GND SPI_MISO when pin25 is H. GPIO8 when pin25 is L. I/O NC NC GPIO3 GPIO0 or UART_Tx GPIO1 or UART_Rx SPI_CS when pin25 is H. GPIO6 when pin25 is L. NC NC SPI_MOSI when pin25 is H. GPIO7 when pin25 is L.
PAGE 7
3. Recommended FootPrint FCC FEDERAL COMMUNICATIONS COMMISION (FCC) STATEMENT 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.
PAGE 8
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must accept any interference received, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: 1.
PAGE 9
This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Antenna Type: PCB PIFA Antenna Peak Gain: 2.