User's Manual
Table Of Contents
- Intended Use Statement
- Safety Information
- Safety Labels
- Introduction
- Package Contents
- Parts
- Remote Control
- Getting Started
- Making Connections
- Basic Operating Instructions
- Basic File Operations
- Browsing the Internet
- Media Files
- Watching Video
- Listening to Music
- Viewing Photos
- Viewing Office and PDF Files
- Viewing Microsoft Word and Adobe PDF Files
- Favorites
- Transferring Files Through Bluetooth
- Settings
- Firmware Upgrade
- Cleaning the Projector
- Troubleshooting
- Specifications
- Limited Warranty
- Video and Audio Decoder Notices
3M
™
Pocket Projector MP180
© 2010 3M. All Rights Reserved.
English
40
Bluetooth Settings
Tap on the Bluetooth Settings icon to turn Bluetooth on or off and pair the projector
with another device. The 3M MP180 uses Bluetooth to share files with another
device like a smartphone or computer.
1 Turn Bluetooth ON or OFF. When the projector's Bluetooth is on, it is
discoverable. This means a Bluetooth device can scan for other Bluetooth
devices and find the 3M MP180 projector.
2 To pair the projector with another, choose the Bluetooth device.
3 Enter the Pin Code and tap Enter.
Note: Some Bluetooth devices must be made discoverable. Look in the
Bluetooth device's Bluetooth settings or refer to the device's manual for
instruction on Bluetooth device pairing.
Wi-Fi Settings
Tap on the Wi-Fi Settings icon to turn on or off the Wi-Fi and connect to a wireless
network. The 3M MP180 uses the Wi-Fi network connection to access the internet
with built-in browser.
1 Turn Wi-Fi ON or OFF
2 Connect to a wireless network by choosing a network and enter any
necessary security details. The security details can be supplied by your
network administrator.
Play Mode Settings
Tap on the Play Mode Settings icon.
1 Choose Playing Video, Playing Photo, or Playing Music.
2 Choose from No repeat, File repeat, or Folder repeat (repeats all files in
folder).
Password Settings
Tap on the Password Setting icon to turn on or off password protection and set the
password. The 3M MP180 projector uses password protection to protect the files
on the projector's memory. The password must be entered every time the projector
is turned on.
1 Choose whether to turn the password on or off.
2 If you choose to turn the password on, then you can add a new password by
inputting your old password, a new password and then repeating the new
password.
Note: If this is the first time setting up a password, leave the old password
field blank.
Important Note: The password cannot be recovered. After 10 attempts, the 3M
MP180 will delete all files and reset the password setting.