User's Manual

Tray Icon
The tray icon appears at the bottom of the screen, and shows the signal strengt
colors
and the received signal strength indication (
Hold the mouse cursor over the tray icon to display the current configuration profile
name and association, as well as transmit and receive speed and the wireless adapter
name and IP address. Right
Help
Open Atheros Client
Utility
Troubleshooting
Preferences
Enable/Disabl
e Radio
Manual LEAP Login
Reauthenticate
Select Profile
Show Connection
Status
Exit
The tray icon appears at the bottom of the screen, and shows the signal strengt
and the received signal strength indication (
RSSI).
Hold the mouse cursor over the tray icon to display the current configuration profile
name and association, as well as transmit and receive speed and the wireless adapter
name and IP address. Right
-click on the tray icon to:
Help
Open the online help.
Open Atheros Client
Utility
Launch the Atheros Client Utility (ACU).
Use the ACU to
configure a profile or
view status and statistics information
Troubleshooting
Run the
Troubleshooting Utility
.
Preferences
Set the ACU startup and menu options. Check to start the
program automatically when Windows starts, and check
menu items that should appear on the popup menu.
e Radio
Enable or disable the RF signal.
Manual LEAP Login
Log in to LEAP
manually, if LEAP is set to manually prompt
for user name and password on each login.
Reauthenticate
Reauthenticate to the access point.
Select Profile
Click a configuration profile name to switch to. If no
configuration profile exists for a connection,
Show Connection
Status
This window displays connection information:
Active Profile
Displays the active
configuration profile
Auto Profile
Selection
Shows whether
auto profile selection
Connection
Status
Displays whether the adapter is connected to a
wireless network.
Link Quality
Lists the quality of the link connection.
SSID
Displays the SSID of the associated network.
Access Point
Name
Shows the name of the AP the wireless adapter is
connected to.
Access Point
IP Address
Shows the IP address of the access point the
wireless adapter is connected to.
Link Speed
Lists the speed of the link connection.
Adapter IP
Address
Displays the IP address of the wireless adapter.
Exit
Exit the Atheros Clie
nt Utility application.
The tray icon appears at the bottom of the screen, and shows the signal strengt
h using
Hold the mouse cursor over the tray icon to display the current configuration profile
name and association, as well as transmit and receive speed and the wireless adapter
Use the ACU to
view status and statistics information
.
Set the ACU startup and menu options. Check to start the
program automatically when Windows starts, and check
menu items that should appear on the popup menu.
manually, if LEAP is set to manually prompt
Click a configuration profile name to switch to. If no
configuration profile exists for a connection,
add a profile.
This window displays connection information:
configuration profile
name.
auto profile selection
is enabled.
Displays whether the adapter is connected to a
Lists the quality of the link connection.
Displays the SSID of the associated network.
Shows the name of the AP the wireless adapter is
Shows the IP address of the access point the
wireless adapter is connected to.
Lists the speed of the link connection.
Displays the IP address of the wireless adapter.