User's Manual

To turn Zero Configuration off on Windows XP, take the following steps:
1.
In Windows XP, open the Wireless Network Configuration Properties dialog box.
2.
Clear the check box
Zero Configuration. When this check box is cleared, all profile settings are controlled
by the configuration profile, which is set up from the ACU Profile Management tab.
Check the Status Information or Diagnostics
The Ather
os client utility includes a number of tools to display current diagnostics and
status information.
Check current status
Check driver information
Check receive and transmit diagnostics
Current Status
The Current Status tab contains general information abou
operations. The Current Status tab does not require any configuration. The following
table describes the items found on the Current Status screen.
Profile Name
The name of the current selected configuration profile.
config
Link Status
Shows whether the station is associated to the wireless network.
Wireless Mode
Displays the
Advanced tab
IP Address
Displays the computer's
Network Type
The
Configure the network type on the
Current Channel
Shows the currently connected channel.
Server Based
Authentication
Shows whether server based authentication is used.
Data Encryption
Displays the encryption type the driver is using.
encryption type on the
Signal Strength
Shows the strength of the signal.
Click the Advanced
button to see the advanced status dia
To turn Zero Configuration off on Windows XP, take the following steps:
In Windows XP, open the Wireless Network Configuration Properties dialog box.
Clear the check box
“Use Windows to configure my wir
eless network settings”
Zero Configuration. When this check box is cleared, all profile settings are controlled
by the configuration profile, which is set up from the ACU Profile Management tab.
Check the Status Information or Diagnostics
os client utility includes a number of tools to display current diagnostics and
Check current status
Check driver information
Check receive and transmit diagnostics
The Current Status tab contains general information abou
t the program and its
operations. The Current Status tab does not require any configuration. The following
table describes the items found on the Current Status screen.
The name of the current selected configuration profile.
config
uration name on the General tab.
Shows whether the station is associated to the wireless network.
Displays the
wireless mode
.
Configure the wireless mode on the
Advanced tab
.
Displays the computer's
IP address.
The
type of network
the station is
connected to.
Options include:
Infrastructure (access point)
Ad Hoc
Configure the network type on the
Advanced tab
Shows the currently connected channel.
Shows whether server based authentication is used.
Displays the encryption type the driver is using.
encryption type on the
Security tab.
Shows the strength of the signal.
button to see the advanced status dia
gnostics.
To turn Zero Configuration off on Windows XP, take the following steps:
In Windows XP, open the Wireless Network Configuration Properties dialog box.
eless network settings”
to set
Zero Configuration. When this check box is cleared, all profile settings are controlled
by the configuration profile, which is set up from the ACU Profile Management tab.
Check the Status Information or Diagnostics
os client utility includes a number of tools to display current diagnostics and
t the program and its
operations. The Current Status tab does not require any configuration. The following
The name of the current selected configuration profile.
Set up the
Shows whether the station is associated to the wireless network.
Configure the wireless mode on the
Options include:
Advanced tab
.
Shows whether server based authentication is used.
Configure the