Data Sheet

LILY-W1 series - Data sheet
UBX-15000203 - R12 Antennas Page 34 of 42
C1-Public
8.2.2 Dual-band antennas
InSide
TM
WLAN
Manufacturer ProAnt
Gain +3.0 dBi
Impedance 50
Size 27 x 12 mm (triangular)
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment
Dual-band (2.4 GHz / 5 GHz) antenna to be mounted on a U.FL
connector.
Should be attached to a plastic enclosure or part for best
performance.
This reference design must be followed to comply with
the LILY-
W1 FCC/IC modular approvals. For information about how
to integrate the U.FL connector, see also the also LILY-W1 series
system integration manual [2].
Approval FCC, IC, MIC, NCC and RED
InSide
TM
WLAN Square
Manufacturer ProAnt
Gain +3.0 dBi
Impedance 50
Size 24x22x1 mm with mounting hole
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment Dual-band (2.4 GHz / 5 GHz) antenna to be mounted on a
U.FL connector. Should be
attached to a plastic enclosure
or part for best performance.
This reference design must
be followed to comply with the LILY-W1 FCC/IC modular
approvals.
For information about how to integrate the U.FL
connector, see also the LILY-W1 series
system integration
manual [2].
Approval FCC, IC, MIC, NCC and RED
Ex-It WLAN Foldable RP-SMA
Manufacturer ProAnt
Polarization Vertical
Gain +3 dBi
Impedance 50
Size 107 mm (Straight)
Type Monopole
Connector Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment To be mounted with a U.FL to Reverse Polarity SMA adapter
cable.
Approval FCC, IC, MIC, NCC and RED.
Original part number at certification: Ex-IT WLAN RPSMA)