Data Sheet

LILY-W1 series - Data sheet
UBX-15000203 - R12 Antennas Page 32 of 42
C1-Public
Ex-It 2400 28 U.FL-100
Manufacturer ProAnt
Polarization Vertical
Gain +2.0 dBi
Impedance 50
Size Ø 12.0 x 28.0 mm
Type Monopole
Cable length 100 mm
Connector U.FL. connector
Comment
To be mounted with a U.FL connector. This antenna
requires to be mounted on a metal ground plane for best
performance. This reference design must be followed to
comply with the LILY-W1 FCC/IC modular approvals.See
also the LILY-W1 series system integration manual [2]
for
information about how to integrate the U.FL connector.
Approval FCC, IC, MIC, NCC and RED.
Original part number at certification: Ex-IT 2400 MHF 28)
Ex-It 2400 Foldable RP-SMA
Manufacturer ProAnt
Polarization Vertical
Gain +3.0 dBi
Impedance 50
Size Ø 10 x 83 mm
Type Monopole
Connector Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment
To be mounted on the
U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for
use (Ex-IT 2400 SMA 70-002).
Approval FCC, IC, MIC, NCC and RED.
Original part number at certification: Ex-IT 2400 RP-SMA 70-
002)
Ex-It 2400 70
Manufacturer ProAnt
Polarization Vertical
Gain +3.0 dBi
Impedance 50
Size Ø 9.4 x 70.5 mm
Type Monopole
Cable length 100 mm
Connector U.FL. connector
Comment
To be mounted on a U.FL connector. This reference design must be
followed to comply with the LILY-W1 FCC/IC modular approvals.
For information about how to integrate the U.FL connector, see also
the LILY-W1 series system integration manual [2]
Approval FCC, IC, MIC, NCC and RED.
Original part number at certification: Ex-IT 2400 MHF 70-001.