Data Sheet

LILY-W1 series - Data sheet
UBX-15000203 - R12 Electrical specifications Page 21 of 42
C1-Public
4.2.9 Wi-Fi transmitter characteristics
Conducted RF transmit characteristics is measured on the U.FL connector on EVK-LILY-W131 [3]
and connected to antenna pin ANT of LILY-W131.
(V
CC
= 3.3 V, V
VCC_IO
= 3.3 V, T
amb
= 25 °C).
Parameter
Modulation
Data rate Power
setting [dBm]
EVM [+%/-dB] Typ* Unit
Transmit
output
power
802.11b Data Rate = 1 Mbit/s
IEEE EVM limit = 35%
7 7 7.2 dBm
13 7 12.8 dBm
14 7 14.3 dBm
16 7 15.9 dBm
Data Rate = 11 Mbit/s
IEEE EVM limit = 35%
7 4 7.3 dBm
13 4 12.7 dBm
14 4 13.8 dBm
16 4 15.6 dBm
802.11g Data Rate = 6 Mbit/s
IEEE EVM limit = -5dB
7 -28 7.1 dBm
13 -25 12.7 dBm
16 -21 15.7 dBm
Data Rate = 54 Mbit/s
IEEE EVM limit = -25dB
7 -35 7.2 dBm
13 -31 12.7 dBm
16 -28 15.7 dBm
802.11n MCS0
IEEE EVM limit = -5dB
7 -28 7.3 dBm
13 -24 12.8 dBm
16 -20 15.7 dBm
MCS7
IEEE EVM limit = -28dB
7 -34 7.2 dBm
13 -32 12.9 dBm
16 -29 15.8 dBm
*
Measurement tolerance +1.5/-3.5 dB. Regional power limitation can reduce the maximum output power (especially on
channels close to band edges).
Table 16: Wi-Fi transmitter characteristics