User's Manual

l 3D mouse (3 keys and wheel)
l Single RF channels 27.045MHZ for mouse.
l Offer 65,536 ID numbers.
l Maximum 3.3k transmission baud rate for mouse.
l Operating distance up to 1.3m.
l Low power consumption indicated function
l Battery: AA*2 PCs
l Low Cost – eliminate need external components.
l Operation Voltage 1.8V ~ 3.3V.
l Support power down Mode and high efficiency power amplifier
l Battery Life: Mouse 50 Working hours (3 months )by continue operation
( TWO AA ALKALINE BATTERY)
l Product Applications: Laptop PC, Desktop PC.
l Operate OS: window 2000/ME/XP/MAC/LINUX OS
Receiver
l Two channels, one for keyboard and one for Mouse.
l 65,536 ID for radio communication.
l Maximum 3.3k transmission baud rate.
l High radio sensitivity -90 dBm.
l Low Speed USB Specification Compliance.
l Meets Universal Serial Bus Specification Version 1.1
l Support USB Sleep Mode.
l Low Cost – eliminate need external components
Operation procedure
The product needs to make pairing with USB receiver before normal application
In general we can use the product directly by the user because the pairing process has
been done at manufacturer site. However, the pairing process needs to be done if there
is no response from mouse.
* How to make pairing (step by step as below process) by user:
1. Insert two batteries to the RF keyboard or mouse, and close the battery door.
2. Plug in the Receiver to the USB port of P.C. and the Access LED will to flash about 2
seconds.
3. Press the ID connect button of Receiver and the Access LED will to flash about 2
seconds.
4. Press the ID connect button of RF keyboard or mouse for pairing with the Receiver