User's Manual

SK-7265 RF WIRELESS KEYBOARD Page No: 5 of

operating is 40 mA and 45 mA at maximum.

Cable connector :

pin USB connector compatible with USB V1.1 spec..

LED indicators

There are four indicators on the receiver included

NumLock ,CapLock,ScroLock and Receiving Data LEDs. The data indicator

will be ON only when data is receiving from the transmitter.

3.3 Function description

3.3.1 Interface specification with host PC

The keyboard Receiver uses USB interface to PC host in data

communication between them.

3.3.2 Operation

Battery Installation

Installs two AA batteries to transmitter and connected the receiver with PC

system, it’s ready for connection procedure.

Connection (ID & channel Pairing) procedure

Procedure by steps

Step-1: Pressing the channel button one time of receiver first ,the DATA LED will

be lit up.

Step-2: Within 10 seconds after RX button pressed , press the channel button of

TX. The DATA LED will turn OFF when it completed connection between TX and RX.

Step-3: Go to the normal operate.

Note: Preset default channel setting in the production line before packing

for delivery

Channel and ID numbers

Channel: two channels including CH1,27.095 and CH2 ,27.145 for

keyboard .

ID: There has a randomly 256 ID from for selection.