User's Manual
28
Charge on.
Max Device Num-
ber
The maximum number of charge points allowed in a group/LAN. This value
cannot be modied by users.
Connectivity Species whether the charge point should always be connected to Internet
using Auto, Ethernet, or 3G. Default value is Auto.
Ping URL Address of the host that the charge point will ping for the Ethernet
connection. This value will automatically set to the address of “Server URL”.
Local Load
Management
Enable or Disable local load management function. This function can only be
enabled in a primary charge point.
HINT: If user changes “Device Mode” setting, then related settings will also change automatically
such as “Connectivity”, “Local Load Management”. The default value is as follow:
Standard Alone Primary Secondary
Primary LAN IP Not used Default value, not changeable Not used
Start Port Not used Default value, not changeable Not used
Max Device Number Not used Default value, not changeable Not used
Connectivity Auto 3G, not changeable Wi-Fi, not changeable
Ping URL User setting User setting User setting
Local Load Management Disable, not changeable Enable Enable
4.3.4.1 Ethernet Settings
Link Mode Congure the Ethernet port to use DHCP or Static IP. If you select Static IP from
the dropdown menu, you need to enter values for IP Address, Netmask, and
Default Gateway elds.
IP Address The IP address of the charge point.
Netmask The subnet mask.
Default
Gateway
The default gateway.
Primary DNS The primary Domain Name Server (optional).
Secondary DNS The secondary Domain Name Server (optional).