User's Manual

1. Product description
1.1 General description
The imp is a complete wireless network node in a module. It is available both in a memory card form-factor (imp001) and
in a solder-down module form-factor (imp002). It works in conjunction with the imp service to allow easy connection of
any device to the internet.
1.2 Features
•
802.11 b/g/n WiFi
•
20MHz 11n channels, 1 x 1
•
+16.75dBm max output power (802.11b)
•
-97dBm typical sensitivity (1Mbps)
•
Integrated antenna with 2.5dBi max gain
•
TX power
•
802.11b 16.5dBm +/-1.5dBm
•
802.11g 14.0dBm +/-1.5dBm
•
802.11n 12.75dBm +/-1.5dBm
•
32-bit Cortex M3 processor
•
Robust embedded operating system with fail-safe firmware updates
•
Virtual machine for vendor firmware
•
LED drive for red/green status LEDs
•
Phototransistor input for our patent-pending BlinkUp technology to provide optical configuration
•
12 user selectable I/Os
•
GPIO, PWM, Analog input & output
•
SPI (2 channels), UART (4.5 channels), I2C (2 channels)
•
Low power 6uA sleep mode
•
FCC, CE, IC C-Tick certified
electric imp, inc
electric imp imp002 specification (confidential, not for distribution)" 2