User's Manual

Introduction
001605, Rev. A 5
Power and Environmental
LEDs
The Fusion 70 Access Point has the following three LEDs on to provide a
visual indication of the operation status of the AP.
PoE Compliant
The Fusion 70 Access Point is IEEE 802.3af compliant, so it can provide
power to the unit by using an Ethernet connection that utilizes power-
sourcing equipment (PSE). If you intend to use an Ethernet connection for
power, ensure that the connecting device is Power over Ethernet (PoE)
IEEE compliant.
Table 3
Power and Environmental
AC power
Input voltage 90-264 V AC
Frequency 47-63 Hz
Operating
Operating Temperature 32 to 104ºF (0-40C)
Relative Humidity 5% to 95% (non-condensing)
Table 4 LEDs
LED Description
Power
• Solid green: Power on
•Off: Power off
• Solid amber: CPU or system failed
• Blinking amber: System initializing or resetting (software self-
testing)
2.4G
• Solid green: Good link at 2.4GHz
• Blinking: Receiving/transmitting data
• Off: No data transfer
Link/Activity
• Solid yellow: Good Link on 100Mbps
• Blinking yellow: Receiving/transmitting data at 100M
• Solid green: Good link on 1000Mbps
• Blinking green: Receiving/transmitting data at 1000Mbps
• Off: No Link