User Manual
Table Of Contents
- Contents
- Safety precautions
- Installing the monitor
- To attach the base:
- 1 Carefully set the monitor on its side with the bottom of the monitor facing you.
- 2 Hold the base so that the narrow end is pointed toward the back of the monitor.
- 3 Align the four hooks on the bottom of the base with the corresponding slots on the bottom of th...
- 4 Slide the base toward the front of the monitor so that all hooks are securely in place. A retai...
- 5 Carefully set the monitor upright and place the monitor on a sturdy, level surface.
- 1 Carefully set the monitor on its side with the bottom of the monitor facing you.
- To connect the power and video cables:
- 1 Position the monitor and the computer so that you can easily get at the back panel of each. Mak...
- 2 Connect one end of the video cable that came with the monitor to the matching video connector o...
- 3 Connect the other end of the video cable to the matching blue video connector on the back of yo...
- 4 Tighten the screws on the video cable connectors to keep them from coming loose. Tightening the...
- 5 Connect the power cord that came with the monitor to the ACpower connector at the back of the ...
- 6 Plug the other end of the power cord into a properly grounded electrical outlet.
- 1 Position the monitor and the computer so that you can easily get at the back panel of each. Mak...
- Removing the base
- To attach the base:
- Starting the monitor
- Adjusting display settings
- A Flywheel control
- B Combination power button and power LED
- OSD options
- To adjust the display settings:
- 1 Press the flywheel control. The main menu opens. The current display settings appear across the...
- 2 Rotate the flywheel control to highlight an option. The name of the highlighted option appears ...
- 3 Press the flywheel control to select the highlighted option, then rotate the flywheel control t...
- 4 Rotate the flywheel control until Exit is highlighted, then press the flywheel control to exit ...
- 1 Press the flywheel control. The main menu opens. The current display settings appear across the...
- To adjust the display settings:
- Video modes
- Power management
- Maintenance
- Troubleshooting
- Important
- No picture
- Make sure that the computer is on.
- Move the mouse or press any key on the keyboard to bring the monitor out of sleep mode.
- Check the video connector and the end of the video cable for any pins that might be bent or pushe...
- Make sure that the video cable is not damaged.
- Restart the computer with the monitor turned on.
- Picture is scrambled
- To reset your monitor to its default settings:
- 1 Start the system.
- 2 Press Ctrl.
- 3 Select Safe mode and wait for the system to finish starting up. Windows98™ starts in a “safe m...
- 4 Click Start, then select Settings, then Control Panel. The Control Panel window opens.
- 5 Double-click the Display icon. The Display Properties window opens.
- 6 Click the Settings tab.
- 7 Click Advanced. The Advanced Display Properties window opens.
- 8 Click the Monitor tab.
- 9 Click Change. The Select Device window opens.
- 10 Select Plug and Play monitor (VESA DDC) by following the on-screen instructions.
- 11 Restart Windows.
- 1 Start the system.
- To reset your monitor to its default settings:
- Display colors are wrong
- Picture is fuzzy
- Picture bounces, jitters, or has waves
- Picture has shadows or “ghosts”
- Color is not uniform
- Image is not sized or centered properly
- Image cannot be adjusted full screen
- No picture
- Important
- ECO document
ECO document
17
What does labeling involve?
This product meets the requirements for the TCO’95/TCO'99 scheme which provides for
international and environmental labeling of personal computers. The labeling scheme was
developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees),
Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens
Energimyndighet (The Swedish National Energy Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability,
emission of electric and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals,
brominated and chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among
other things. The product must be prepared for recycling and the manufacturer is obliged to have
an environmental policy which must be adhered to in each country where the company
implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain
period of inactivity, shall reduce its power consumption to a lower level in one or more stages.
The length of time to reactivate the computer shall be reasonable for the user.
Labeled products must meet strict environmental demands, for example, in respect of the
reduction of electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product.
The complete environmental criteria document may be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
E-mail (Internet): development@tco.se
Current information regarding TCO’95/TCO'99 approved and labeled products may also be
obtained via the Internet, using the address:
www.tco-info.com
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their
purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a
computer casing can consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related to another group of
environmental toxins, PCBs. Both the flame retardants containing bromine or chloride and the
PCBs are suspected of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bio-accumulative* processes. Flame retardants have
been found in human blood and researchers fear that disturbances in foetus development may
occur.
The relevant TCO’95/TCO'99 demand requires that plastic components weighing more than
25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame
retardants are allowed in the printed circuit boards since no substitutes are available.