User's Manual

APPROVED CHECKED DESIGNED
MODEL No.
PART NAME
PART No.
BMK-201
User Manual
515300108247
李采婕
blue
2013.10.08
材質 模造
( ): 100p 紙
上光方式
( ): no
顏色 black
( ):
尺寸
( ): 60x60mm
公差
( ):+-0.5mm
60mm
60mm
(封面)(封底-空白)
(內頁1)
(內頁2) (內頁3)
(折法)
BMK-201 User Manual
Schematic diagram
LED
USB
Lanyard
MIC
VOL +
MFB
VOL -
Charging starts when the unit and the computer are connected.
Charging is completed in about 3.5 hours at most and the
indicator goes off automatically.
The indicator is lit during charging.
4 Make the Bluetooth connection from the
Bluetooth device.
1 Place the Bluetooth device within 1 meter of this unit.
2 Long press MFB button up to 6 seconds to turn on this unit
and enters pairing mode. (you can hear 2 beep prompts)
The indicator flashes fast in pairing mode for 2 minutes.
3 Perform the pairing procedure on the Bluetooth device to
detect this unit.When the list of detected devices appears on
the display of the Bluetooth device, select “BMK-201 V0.x”
If passkey input is required on the display of a
Bluetooth device, input “0000.”
Charge the unit
Pairing and connecting with the Bluetooth device
Operate your mobile phone to make a call.
- To terminate a call, press the MFB button on the unit.
Press the MFB button on the unit when an incoming call arrives.
- Operate in the same way when an incoming call arrives while
you are listening to the music.
Making a call/Receiving a call
Profile: HSP, HFP
1 Press MFB button for 3 seconds to turn on the unit.(you can
hear the long prompt and the indicator is lit solidly for 5
seconds)
2 Make the Bluetooth connection from the Bluetooth device.
Connecting with the paired device
Start playback on the Bluetooth device.
Listening and Calling
Operate the unit after making Bluetooth connection
Press MFB button for 3 seconds to turn off the unit.(you can hear
3 beep prompts and the indicator is lit)
Turn off the unit
Listening to music
Profile: A2DP