User's Manual

SETTINGS
37
7
The configuration process will start. If
the process is completed successfully,
a connection signal icon will appear on
the top right corner of the screen.
8
If the process is not completed
successfully, press
ENTER
to confirm
the highlighted ‘OK’ option.
9
Normally, the ‘Network Settings’
screen will appear. Press ▲▼ to select
a connection mode, the press
ENTER
to try another setup process
.
IF
IF
you had previously set your wireless
AP/router to the manual mode, the
screen listing details of the current
network may appear. Press ▲▼◄► to
modify the settings, then try again.