User's Manual

SETTINGS
40
■
By
Entering Network Name
(SSID)
1
Press
MENU
to bring up the Menu
screen
.
2
Press ◄► to select the ‘Network
Settings’ icon.
3
Press ▲▼ to select ‘Wi-Fi Settings’,
then press
ENTER
.
4
Press ▲▼ to select ‘Manual
Configuration’, then press
ENTER
.
5
Press ▲▼ to select ‘Enter Network
Name (SSID)’, then press
ENTER
.
6
A screen requesting the SSID will
appear. Press ▲▼◄► to enter the
network name, then select ‘OK’ to
confirm.

SSID (Service Set Identifier)
7
A screen requesting the network key
(password) will appear. Press ▲▼◄►
to enter the network password, then
select ‘OK’ to confirm.
8
The configuration process will start. If
the process is completed successfully,
a connection signal icon will appear on
the top right corner of the screen.
9
If the process is not completed
successfully, press
ENTER
to confirm
the highlighted ‘OK’ option.
10
Normally, the ‘Network Settings’
10 Normally, the ‘Network Settings’ 10
screen will appear. Press ▲▼ to select
a connection mode, the press
ENTER
to try another setup process
.
IF
IF
you had previously
set
your
wireless
AP
/router to the manual mode, the
screen listing
details of
the
current
netwo
rk may appear.
P
ress
▲
▼
◄
►
to
modify the settings,
then
try
again.