User's Manual

1.5 System default settings
The following default setting of the system should be realised:
Byte 1
• Bit 0 max pressure %
0 = 150% of the preset pressure for the relevant axle
• Bit 1 pressure warning %
1 = 75% of the preset pressure for the relevant axle
• Bit 2 pressure alert %
1 = 50% of the preset pressure for the relevant axle
• Bit 3 spare wheel on display
0 = no spare wheel on display
• Bit 4 6 wheel display
0 = standard 4 wheel display only
• Bit 5,6,7 unit of measuring data
010 = Bar and °C
Byte 2
• Bit 0 government requirements
0 = European display
• Bit 1 display technology
1 = multi colour display
• Bit 2,3,4 display colours
110 = blue
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that ma
y
cause undesired o
p
eration.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.