User's Manual

4G GPS Tracker User Manual
Please read the instruction manual before using,
in order to install and use properly!
Open the sim card
slot,insert the Nano
sim card to the slot
by facing up.
1.Preparation Before Using
1.1.Check if the device is complete.
1.2.In shutdown status, insert a Nano SIM Card which supports 4G
network and activate data flow, GPRS and caller ID function
according to the installation method.
2.SIM Card Installation
Note that insert the sim card in
shutdown status and boot the
device,and fix the slot cover
after inserting the sim card.
3.Startup/Shutdown
Switch on the device: Long press the power button for 5 seconds till the
light flashes,there will be boot music when the device is on.
Switch off the device: When the device is online,it only can be shutdown
remotely from APP. When the device is off line showed on APP, pull out
the sim card, after 10 seconds long press the power button to switch off
the device.
Charging: Use magnetic charging cable and connect to the phone charger.
Attention:When there is SIM card inside and available network, the device
cannot be turned off by the power button at the side. Long press the power
button at the side for more than 15 seconds to force the restart.
5.Product Function
1).GPS+LBS
Location
2).Voice communication
3).Historical route
4).GEO fence
5).SOS
6).Low power alarm
7).Voice monitoring
8).Multiple work modes: Normal mode, power saving mode
9).Multi-platform monitoring: Support Android,IOS system.
10).Universal available: Support frequency band of 4G FDD:
Band 1/2/3/4/5/7/8/17/20; 3G WCDMA: Band
1/2/5/8; 2G GSM:Band 2/3/5/8
4.Device introduction
SOS button
Power button
SIM card slot
8.Product Function
8.1 Work mode
The device has two work modes,users can change work modes via the
APP settings.
1）.Normal mode(10 minutes interval): the device will update location
information every 10 minutes.
2）.Power saving mode(60 minutes interval): the device will update
location information every 1 hour.
8.2. Historical route
Three months’ historial route data can be checked.
8.3. Geofence
Users can activate this function on APP, and set the range of Geo fence
on the Map. If the device is out of the fence, an alert message will be
received on the APP.
8.4. Voice monitoring
Select the voice monitoring function in setting, enter your phone number.
After confirmation, the device will automatically call the preset phone
number. You can hear the voices around the device by answering the call.
8.5. GEOFENCE
The minimum radius of the geofence is 200m. An alert message will be
received when it is out of the fence. You can set three geofence.
6.Light effect instruction
Switch on the device: The light will be on for 20 seconds,then will flash
slowly after it is turned on.
Charging: It will flash slowly when charging,keeps lighting when charged
full.
Button: when it is working,press the button till the light lights for 3 seconds.
Location abnormally: The light flashes slowly.
Location successfully:The light goes out.
7.APP
Scan the QR code below, download and install it.
8.6. SOS number
It can be set three numbers at most as SOS number. When the device
connnects to network, long press the SOS button the device will call the
preset phone number one after another twice until it is answered. If
nobody answer after twice, it will stop calling. An alert message will be
sent to the SOS number (it is turned off by default, you can activate it in
SMS alerts).
8.7. Location
You can check the real time location of the device. The position of both
the device and phone will be showed on the map. Press “Locate” to do
real time location. There are three different location modes on the map
“GPS (Red icon), LBS (Blue icon), WIFI (Green icon)”.
8.8. History
You can check the historical route in different period. The base station
switching on the menu is the switch displaying base station when
checking the historial route. It shows base station location path when it
is on, while do not show when it is off.
8.9. Sound Guardian
Enter the guardian’s phone number, and press “Confirm” to send remote
monitoring request. When it receives this request, the device will call the
number automatically. When the phone answers to the call, the guardian
can hear the voice around the device, while the device cannot hear the
voice of phone.
8.10.SMS Alerts
Lower power, SOS. The alert message will be sent to the guardian’s
number preset in APP.
8.11. Remote shutdown
When the device is working normally, it can be turned off remotely via APP.
8.12.Remote Restart
When the device is working normally, it can be restarted remotely via APP.
9.Declaration
Thanks for purchasing the device, the device functions are realized by
using both hardware and APP. Please read the instructions carefully to
assure correct usage. You can refer to the help on the APP for more
details.
Users will be exempted from guarantee if disassemble the device on
your own.
Please use original accessories to avoide unexpected damage.
Damage caused by improper use of the device or failure to use original
accessories will not be covered by the guarantee. Our company will
not take any responsibility for the damage caused under this situation.
Attention:
1.Do not put or use the device under water.
2.Keep the device away from fire, or extreme environment such as high temperature.
3.Remind kids not to eat the device.
4.It is forbidden to use other charging device.
If the device is out of battery or outside network service area, the functions will not be able
to work properly.
If you disassemble this product, it will lose the warranty. This product
works with a sim card which activates dataflow. The device functions
will work well under good network coverage. Our company donot take
any responsibility for the loss caused by operator network outage or
other force majeure.
01 02 03
0504 06 07
Or searching APP name:Lite Guardian from Apple store or
Google Play to download and install it.