Installation Guide

¾” Pile Height – 2” Base
1-3/8” Pile Height – 2” Base
1-5/8” Pile Height – 2” Base
3. Lay Artificial Turf
Now it’s time to lay your artificial grass rolls. Tools like carpet kickers can
come handy in this phase.
If you are using different rolls, then make sure pile direction is facing the
same way, and if you are using four tone grass, then place your rolls
accordingly. Spread and stretch the grass that covers each inch of your area
and some extra grass over the edges.
It is advisable to let the artificial grass settle for a few 2-3 hours before
proceeding to the next step.
4. Cut to Fit
Now once you have laid down the artificial grass, it’s time to cut extra turf
using cutter or scissors around the boundary of your area of application.
Carefully cut the extra carpet from the underside so you can better see the
thread pattern.
5. Join the Artificial Grass Patches
As in most cases, several rolls of artificial grass are used to cover an area. So,
use Artificial Grass joining Tape or glue to attach these pieces. Make sure that
parts are close with each other and little or no gap between them to ensure a
seamless, joint less look.
6. Pin Down the Edges